Stan Design

Category: Floor jacks

Categories
Floor jacks Hydraulic Jacks Pit Jacks Truck Jacks

Preventing workplace accidents how scorpion pit covers help

Prevent Workplace Accidents with Scorpion Pit Covers
Prevent Workplace Accidents with the help of Scorpion Pit Covers

The story is not new. In fact, it has been run time and again while promoting pit cover accident prevention strategies and highlighting the risks uncovered pits pose to personnel and property in automotive workshops. 

During routine maintenance at a truck service center, a worker tripped and fell into an uncovered service pit, leading to severe bodily injuries and not to mention a temporary halt in operations. 

At commercial garages, pit safety solutions are a less-than-common sight. And the ones that exist are less than effective. Below we will cover some of the main risks of uncovered pits. 

Top 5 Uncovered Pit Risks

  1. Falling Risk – The numerous risk posed by uncovered pits is the obvious danger of falling into it. Especially, if their exterior outlines are not marked with a colored line as a warning sign, even though the efficacy of just a colored line alone for preventing such mishaps is debatable. The grave health hazard this sets for the personnel handling it daily is massive.
  2. Explosion Risk – Another risk of uncovered pits is the risk of explosion or fire and fumes. This usually happens when unusual chemicals are introduced in any manner (just forgotten and mixed up, even!) and arranged within the physical proximity of electrical wires or damp environments, which are often found in service pits. Even faulty machinery or equipment in automotive workshops and service pits can set off fire.
  3. Ventilation Risk – The point made above is both a cause as well as effect of the risk of ventilation. Poor ventilation or even the lack of one in service pits can lead to major risks to the overall health of the environment of the commercial garage within which it is located, even if it is uncovered. 
  4. Drainage Risk – This brings us to the point of drainage risks. Draining any kind of fuel near service pits unauthorized for such work is highly risky. Besides, uncovered and poorly ventilated pits release the hazardous atmosphere developed by fuel vapors within them into the open, harming both personnel and customers, not to mention the reputation of the establishment.

Top 5 Safety Features in Pit Covers to Look For:

  1. Panels – When looking for inspection service pit covers for your commercial garage or automotive workshop, you should pay special attention to their panels, that would not only that enhance safety but also the efficiency in an automotive service environment. Typically, depending on whether the cover is made of concrete, wood, plastic or some other material, you should check the pit liner to ensure durability and protection.
  2. Design – An important yet often overlooked safety feature in pit covers is their design. Do they accommodate space for safety rails to extend along the length of the pit, painted safety yellow, to guide vehicles, if the service pit does not already have it outline on its exterior? Is the texture of the pit cover composed of non-skid material for safety? These are yardsticks to judge a pit cover design by. 
  3. Capacity – The tolerance of the pit cover as well as the track surface, if at all it provides a track system feature at all, should be commensurate with its weight lifting capacity for top notch security. 
  4. Convenience – Most modern service pits come with the convenience of modern technology. Small storage units like a cup holder for the technician using the pit momentarily, or perhaps an installed intercom system for seamless communication between upper and lower units, or quick access toolbox holders – your modern pit cover should come with these facilities if you so wish for. However, it is on you to check whether they are inherently safe to use.
  5. Compatibility – Finally, the biggest safety feature in pit covers to look out for is their compatibility with your existing service pit systems like those provided by Devon and Uni-lube. Stan Design Inc. is one such company that has emerged as an industry leader in North America because of its design and manufacturing of pits that are universally compatible with the leading pit system brands.

Pit Safety Solutions – Scorpion Pit Covers 

The incident discussed in the beginning of the blog underscores the critical need for secure pit cover installation and pit safety solutions to prevent workplace accidents and ensure worker safety. 

Properly secured and durable pit covers are essential to minimize uncovered pit risks in service pit areas. The safety systems can be as simple as a fishing net strung across the opening. 

At Stan Design Inc., we examined all these systems and decided there was room for improvement. So, we bring to you Stan Design Inc.’s Scorpion Pit Cover PLC1000, important to avoid harm to vehicles as well workers. 

Apart from dropping right in to fit in like a glove and providing your existing pit facility with the safety and security it needs, the Scorpion Pit Cover PLC1000 offers extreme strength and resistance to all types of chemicals. 

Made from a proprietary plastic composite material, the fruit of labour of innovation, design and development genius of over two decades, Stan Design Inc.’s revolutionary new system has segments 2ft long and as wide as your pit. 

These segments are very light- only 12 lb./ panel- and slide onto one another with just a push, with each panel holding over 1,000 lb., hiding all the meanness of the oily mess below, giving your workshop a tidy and hygienic look. 

Give your customers the professionality they expect, while upgrading from unreliable pit safety systems and increasing your productivity. 

get in touch!

Categories
Bridge Jacks Fast Lube Floor jacks Jacks Pit Jacks Truck Jacks

Innovations in Truck Jack Technology: What’s New in 2024

Cutting-Edge-Truck-Jack-Technology-1
North American Truck Jack Market: Trends

Business owners throughout Canada are losing valuable time each day using slow and heavy duty pit jacks. These jacks require multiple stands and additional chocks to support the vehicles, resulting in significant inefficiencies.

Not to mention the risk of injury to body and damage to the vehicles they must brave every day with these conventional truck lifting solutions, which are devoid of any automobile industry innovations concerning safety locks or checks.

The truck jack industry has made some considerable advancements in jack technology in recent years but unfortunately has not been able to make it accessible to the masses. Meaning, for the individual buyer or small scale business consumers, it is still out of reach.

This leaves a major population of automobile consumers and the servicing industry with outdated and risky tools at their disposal for regular vehicle maintenance and repair purposes. At the height of its receiving end is the trucking industry.

It is no secret that the jack technology used for servicing heavy duty or military grade trucks needs to be commensurate with specialized truck lifting solutions like heavy duty pit jacks or Military Vehicle Lifting Solutions, and the likes.

That is why industry stalwarts (like Stan Design Inc., to name one) have come up with genius innovations that have revolutionized how professionals wield the truck jacks and the time and energy resources they expend on it. Read on to check the latest innovations.

Latest Jack Technology for Truck Lifting Solutions

  1. Safety Enhancements – Perhaps the biggest technological breakthrough in the truck lifting solution industry has been the installation of safety locks at regular intervals of different heights during the lifting and lowering process. Stan Design Inc., for instance, has introduced the in-built automatic three stage locking mechanism that ensures safety while eliminating the need for vehicle stands. Not only does this erase the risk of injuring oneself while operating a heavy duty pit jack, but also the probability of injuring the vehicle.
  2. Enhanced Lifting Capacity – With advancements in jack technology, the additional, and not to mention expensive, need for purchasing chocks and stands for support while lifting, suspending and lowering heavy duty or regular vehicles has finally been overcome. With more robust military grade jacks available (like Stan Design’s 20 ton lifting models) at affordable price points, the lifting capacity is intensified without additional expenses.
  3. Energy Saving – The points discussed above lead to reduced energy wastage for the personnel involved in operating these jacks. Besides, exclusive Stan Design Inc. jack features like lifting within seconds with just one push of an external button as opposed to mechanical hand pumping, enable by swift hydraulic systems and powerful air bags design offer extra support to any commercial garage operator.
  4. High Grade Durable Materials – Consumers have bought essential automotive tools like vehicle jacks earlier only considering low entry prices and have suffered for it over time. Now they have realized that durable materials come from the use of high grade fine steel jack bodies, quality coat paints that protect them from corrosion and rust and zinc plated components and accessories that resist oxidation and deterioration. Good for you, Stan Design Inc. has got them all!

Automobile Industry Innovations by Stan Design Inc.

Floor Jacks:

Scorpion TJ12S –

  • Capacity- 24,000 lbs/12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

Scorpion TJ12SL –

  • Capacity- 24,000 lbs/12 Tons
  • Only 7.5’’ Collapsed Height
  • Lifts Over 15”

Scorpion TJ14 –

  • Capacity- 28,000 lbs./ 14 Tons
  • Only 8.25” Collapsed Height
  • Lifts Over 20”

Scorpion TJ12E –

  • Capacity- 24,000 lbs/12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”
  • 2 Extendable Arms

Scorpion MJ25 –

  • Capacity- 25,000 lbs./ 12.5 Tons
  • Lifts Over 36”
  • Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications

Heavy Duty Pit Jacks :

Scorpion PJ15 –

  • Capacity – 15,000 lbs/7.5Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion PJ25 –

  • Capacity – 25,000 lbs/12.5Tons.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion P12S –

  • Capacity – 12,000 lbs/6 Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ15S –

  • Capacity – 25,000 lbs/12.5Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ25S –

  • Capacity – 25,000 lbs/12.5Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 32” Wide
  • Expandable Size – 46” Wide

Scorpion Installed Tire Service

  • Installed Version of TJ14
  • Designed to lift vehicle across axle
  • Capacity – 25,000 lbs/12.5Tons.
  • Dual Hydraulic Arms
  • Built-in safety lock
  • Extended Lifting Height – over 20”
  • Incredible value for money

Available Models

  • TJ14AG – Above Ground
  • TJ14SG – Semi-in-Ground
  • TJ14IG – In-Ground
  • Extended Lifting Height – Over 20”

Rolling Bridge Jacks

StanJack J6000H –

  • Capacity – 6,000 lbs/3 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”

StanJack J7000L –

  • Capacity – 7,000 lbs/3.5 Tons
  • Heavy-Duty Air Bag
  • Extended Lifting Height – Over 10.25”
  • Lowest Collapsed Height – Only 7”

StanJack J7500H –

  • Capacity – 7,500 lbs/3.75 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 10.25”
  • Lowest Collapsed Height – Only 7”

StanJack J9000H –

  • Capacity – 9,000 lbs/4.5 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”

StanJack J12000H –

  • Capacity – 12,000 lbs/6 Tons
  • Heavy-Duty Hydraulics

StanJack J15000H –

  • Capacity – 15,000 lbs/7.5 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”

StanJack J18000H –

  • Capacity – 18,000 lbs/9 Tons
  • Heavy-Duty Hydraulics

StanJack J25000H –

  • Capacity – 25,000 lbs/12.5Tons.
  • Heavy-Duty Hydraulics

StanJack J35000H –

  • Capacity – 35,000 lbs/17.5 Tons
  • Heavy-Duty Hydraulics

StanJack J50000H

  • Capacity – 50,000 lbs/25 Tons
  • Heavy-Duty Hydraulics

Fast Lube Jacks :

Pit Jacks J7500HFL –

  • Capacity – 75,000 lbs/37.5 Tons
  • Narrow 34.5” Top Beam
  • Heavy Duty Hydraulics

Pit Jacks J7000HFL:

  • Capacity – 7,000 lbs/3.5 Tons.
  • Narrow 34.5” Top Beam
  • Heavy Duty Hydraulics

Pit Jacks J9000HFL –

  • Capacity – 9,000 lbs/4.5 Tons
  • Narrow 34.5” Top Beam
  • Heavy Duty Hydraulics

get in touch!

Categories
Bridge Jacks Floor jacks Hydraulic Jacks Jacks Truck Jacks

Benefits of Investing in North American Made Truck Jacks

Benefits-of-Investing-in-North-American-Made-Truck-Jacks-
Why North American Truck Jacks Are Worth the Investment

Truck jack benefits are myriad since these jacks are indispensable tools for repairing and maintaining your heavy-duty trucks. From portable floor jacks or bottle jack models to larger and heavier fixtures like fast lube rolling pit jacks, quality jack products come in every size and shape.

Here is the catch though! The word quality. This is essential in differentiating between conventional jacks and modern jacks made in USA/ Canada. What we mean by conventional jacks are truck jacks that are mass manufactured using low-quality materials to make them accessible to larger groups of customers.

The problem with this kind of a production model, although it might seem cost-effective at the first glance, is that they are not durable enough to last for a long time, nor do they work (mostly) without additional support equipment like chocks and stands, ultimately incurring more cost on the client.

Jack Manufacturing in North America

There is a rather simple solution to the problem discussed in the opening section of our blog – buying local. Simply put Stan Design, a jack manufacturing company in NorthAmerica, is the end-to-end manufacturing process of heavy-duty and other types of truck jacks made in USA/ Canada, including production, assembly, marketing, distribution, etc.

This process ensures that truck jack manufacturers adhere to strict manufacturing standards in place at their respective geographic locations, empowering the customers (that is, you) to be vigilant over the quality of jack products you are investing in. This also paves the way for a transparent manufacturing process that is imperative to boost the local economic health of the community, overall.

Since today’s consumers are more aware than ever before in the history of the national economy, they also collectively care about the ethical involvements of the companies they buy from. North American jack manufacturing companies like Stan Design Inc. not only source and manufacture products locally, but they also see to it that this process gives back to the society.

Besides, Stan Design Inc. takes immense pride in bringing together the innovative genius and the design expertise of the finest of Canada to give birth to the best truck jacks in North America which are a brilliant example of the confluence of the two. Their premium and compact lifting solutions are built with cutting-edge technology that are safe, reliable and stand the test of time.

5 Quality Truck Jack Product Benefits

  1. Cost Effective – Most truck jacks require additional chocks, stands or adapters to fully function. Not quality jack products. The best truck jacks’ benefits are that they are highly cost effective as they do not require these additional support equipment to deliver high quality lifting solutions.
  2. Safe and Durable – Perhaps the most important thing anybody would be looking for in the list of truck jack benefits is the safety and durability they provide. Being made from high grade materials, that should not be a worry for consumers investing in quality jack products.
  3. Time Efficient – Businessmen like commercial garage or automotive workshop owners and managers across Canada waste countless hours every day choosing the right bridge jack for lifting heavy duty vehicles with slow, heavy, and cumbersome truck jacks that require multiple processes and additional products to support the lifting, suspension and lowering of trucks for repairs and maintenance. Quality jack products reduce this wastage of precious time and let them work on the more productive aspects of their business, increasing their revenue generation.
  4. High Grade Quality – Quality jack products are mostly made with high grade fine steel material that can easily bear the wear and tear induced by lifting heavy weights daily. Naturally, these robust products are more durable than ordinary truck jacks, eliminating the need for the customers to keep buying them over and over again.
  5. Reduces Manual Labour – Tools are meant to aid humans and make their work easy, not the other way around. And the best truck jack benefits list would be incomplete without mentioning that they reduce manual labour of hand pumping and other rigorous, time consuming, and unsafe and unreliable primitive methods of lifting and lowering heavy loads like heavy-duty trucks.

Best Jacks Made in USA/ Canada to Invest in 2024

Let us face it. Tire rotation, oil changes, brake system maintenance, etc. sound like unimportant tasks better off delegated to professionals. Unless we are in too deep.

Sure, for regular repairs and maintenance, we need to take our vehicles and trucks to workshops, but what about emergency road situations? YouTube videos may come in handy for learning instant rescue hacks, but what about the tools?

That is why you need to carry portable, yet rugged truck jacks made in USA/ Canada with you. And what better place to shop them from other than Stan Design Inc. With over 25 years of experience in the industry, they have mastered the art and science of designing and manufacturing to deliver only the highest quality jack products.

Their state-of-the-art machines are designed with the utmost care to make them robust, durable, and sophisticated with quality and innovation that are unrivalled by anything else in the market.

Their dedicated crew of highly skilled, creative and experienced engineers and mechanics work tirelessly to meet your specific needs and expectations, while adhering to the strictest safety and quality standards in the industry.

All of their products are tested and certified by reputable organizations such as CSA Group, UL, CE, ISO, etc. Stan Design Inc. also offer warranties and after-sales support to all our customers so that they can utilize their products to their full extent.

Canada’s Stan Design Inc. Scorpion Jack Models to Buy:

Scorpion Floor Jacks:

Scorpion TJ12S –

  • Capacity – 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

Scorpion TJ12SL –

  • Capacity – 24,000 lbs./12 Tons
  • Only 7.5’’ Collapsed Height
  • Lifts Over 15”

Scorpion TJ14 –

  • Capacity – 28,000 lbs./14 Tons
  • Only 8.25” Collapsed Height
  • Lifts Over 20”

Scorpion TJ12E –

  • Capacity – 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”
  • 2 Extendable Arms

Scorpion MJ25 –

  • Capacity – 25,000 lbs./12.5 Tons
  • Lifts Over 36”
  • Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications

Scorpion Pit Jacks:

Scorpion PJ15 –

  • Capacity – 15,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion PJ25 –

  • Capacity – 25,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion P12S –

  • Capacity – 12,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ15S –

  • Capacity – 25,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ25S –

  • Capacity – 25,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 32” Wide
  • Expandable Size – 46” Wide

get in touch!

Categories
Fast Lube Floor jacks Jacks Truck Jacks

Fast Lube Jacks vs. Traditional Jacks: Which One Offers Greater Efficiency?

Fast Lube vs Traditional Jacks: Efficiency Comparison
Fast Lube vs Traditional Jacks: Efficiency Comparison

The 2 most common versions of jacks available currently are fast lube jacks and the older, traditional ones. An easy-to-use and high-quality jack is essential for vehicle maintenance, whether you are a DIY enthusiast, a motorhead, or a professional auto technician. The 2 most common versions of jacks available currently are fast lube jacks and the older, traditional ones. Fast lube jacks have gained greater currency over the past few years and are a staple for mechanics since these can help you save at least $24,000 every year on tire rotation services!

But which ones of these are the best and how do they match up against each other? If you have read this far, chances are you already have a good idea about heavy duty jacks for trucks and related sets of equipment. Still, let us begin with a brief introduction of the 2 types.

Benefits of Fast Lube Jacks:

  • The element of speed: Fast lube jacks are incredibly quick in their operation. They can lift a minivan or a large SUV in seconds, making them ideal for any environment where time is critical.
  • A lot more user-friendly: They are designed to be a lot more user-friendly. The hydraulics work better in these sets. 
  • More portable: Mostly fast jacks are super-portable, making them easy to move around and to use in several different locations and conditions.
  • Safer operations: All modern fast lube jacks come with built-in safety features expressly designed to prevent accidents.

Decoding Fast Lube Jacks

Fast lube jack also known as quick jacks, are designed primarily for both speed and convenience. Quick jacks are very common in quick vehicle service stations where time really is of the essence. Fast lubes are hydraulic jacks that can lift a vehicle quickly and with minimal effort. The design template typically includes a lever system that allows for easy operation. 

Drawbacks of Fast Lube Jacks:

  • Can be expensive: Did you see the list of benefits these heavy duty pit jacks offer? On the downside, it makes them more expensive than the standard versions. 
  • Require more maintenance: While this may or may not sound like a drawback, given that tools of all sorts require care, these jacks require more maintenance to ensure seamless functionality. 

Traditional Jacks

As the name suggests, these jacks have been around for a long time and are almost as old as vehicles themselves. They come in various forms, such as bottle jacks, scissor jacks, and floor jacks. These jacks rely solely on their mechanical advantage to lift a vehicle.

Benefits of Traditional Jacks:

  • The affordability factor: Traditional jacks are almost always less expensive than fast lube jacks.
  • More durable: Traditional jacks are built to last and are capable of withstanding heavy & even neglectful use over longer periods.
  • Extremely simple to use: Because they have fewer moving parts, maintaining and using them is much easier. In comparison, the fast jack is a Swiss watch!
  • More versatile: Traditional jacks can be used for a variety of applications beyond just lifting vehicles.

Drawbacks of Traditional Jacks:

  • Time consuming: Lifting a vehicle with a standard jack requires extra time and effort.
  • More physical effort needed: Traditional jacks require a lot of physical effort to operate, making it off-putting to many users.
  • Portability problems: Some traditional jacks, floor jacks being a good example, are bulky and not designed to be carried around.

Comparing Efficiency Levels 

Let’s now compare their efficiency based on a few key factors, namely speed, ease of use, the price factor, and versatility. 

  • Speed: Based on swiftness of operations, fast lube jacks are the clear winners. They can lift a vehicle in seconds, something traditional jacks can take several minutes to do, especially if you’re using a scissor jack or even a bottle jack. If you run a service station, for example, and need to handle multiple vehicles simultaneously or in short spans, fast lube jacks are irreplaceable. 
  • Ease of Use:
  • Quick jacks are designed to be easily accessed. The hydraulic assistance combined with lever systems makes lifting heavy vehicles a breezy affair. Traditional jacks are more cumbersome and certainly more physically demanding. If more efficient use is what you need, go for fast lube jacks. 
  • The price factor: Traditional jacks are a lot more affordable than fast lube jacks. If budgetary constraints are a big concern, traditional jacks might well be the superior option. Don’t forget the long-term benefits and potential time savings offered by fast lubes, however.  
  • Versatility: Traditional jacks are more versatile in their applications. Do you also need to sometimes lift heavy machinery or require supporting machinery during extensive repairs of, say, buildings? If so, opt for the older variants since fast lube jacks are designed specifically for lifting vehicles.  

A few other considerations

  • How frequently will you use it: If lifting your vehicle is something you do very often, opt for the speed and ease of use of fast lube jacks.
  • Types of vehicles you use: This is an issue that only automotive insiders are aware of. The type and weight of vehicles you’re working with should always influence your choice. Fast lube jacks are especially designed for passenger cars and light trucks, while traditional jacks can handle a wider range of weights and are also used as heavy duty jacks for trucks.

For example, if you’re working on your trusty pickup or a van, it would make more sense to use a traditional jack. Likewise, trust a fast jack to lift a medium-to-large passenger car or a hatchback, or a coupe with ease

  • Budget: Assess your budget and allow for the long-term benefits of the 2 types. Yes, fast lube jacks do have a higher upfront cost. Then again, their efficiency can lead to cost savings in a high-volume (read professional) work environment.

And the winner is… 

As it stands, fast lube jacks and the grand old traditional jacks have their place in vehicular maintenance. Fast jacks are a lot more efficient in terms of speed and ease of use, traditional jacks are a lot more affordable and exceedingly versatile, and are suitable for a range of applications, as well as the occasional, one-time use. 

Ultimately, the choice boils down to your specific needs, the amount of money you can invest, and your work environment. If you’re a professional and are intent on scaling up your repairs and fitments business, you need both speed and convenience in a time-bound setting, and you require fast lube jacks! 

But if you want versatility and lower prices over everything else, traditional jacks are certainly a better fit. 

The top 3 Stan Design pit jacks available right now:

Pit Jacks J7500HFL 

  • Capacity- 75,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 

Pit Jacks J7000HFL 

  • Capacity- 7,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 

Pit Jacks J9000HFL 

  • Capacity- 9,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 

get in touch!

Categories
Floor jacks Hydraulic Jacks Jacks

Ultimate Guide to Buying the Best Floor Jack Adapter

Choosing the Best Floor Jack Adapter
Choosing the Best Floor Jack Adapter

Floor jack adapters, as the name implies, are accessories to enhance the performance of floor jacks used for loading, lifting, and lowering vehicles for purposes such as repairs, service or regular maintenance. These adapters are essentially small tools that are used to help the floor jack with security while they are in use, enabling it to be used in a wide variety and range of situations and applications.

What are Floor Jack Adapters? 

Picture a floor jack placed on a solid surface, about to be used to lift, suspend or lower heavy loads like vehicles, except it seems somehow… wobbly, that is, not secure in its contact with the solid surface. This is where floor jack adapters come in. They primarily fill this gap and provide floor jacks with the stability they need. It is a great tool for people across various levels of experience with automotive maintenance – DIYers to professionals.

A wobbly floor jack is hardly of any use to anyone, even if it is otherwise in pristine condition. Not only that, a floor jack that is not securely placed in its physical environment is also a threat to itself as well as its surroundings. It has the potential to destroy itself by rendering its services effectively useless, while doing great harm to the vehicles it may lift and posing great danger to the safety and life of the professional wielding it.

Floor Jack Adapters: Buy or Make? 

Now that you understand the need for floor jack adapters, let us learn if it is wise to buy one or make one yourself! Buying one being a small investment and a myriad of do-it-yourself videos on the internet teaching you how to make a floor jack adapter by yourself, it might seem irresistible to try and get your hands dirty making one. But wait… this is where readymade floor jack adapters shine!

Since these devices are used to make lifting, suspending and lowering heavy vehicles with the use of floor jacks safer and easier, it is best to buy them from reputable jack manufacturing companies, instead of trying to make one for yourself. There are lots of technical details that can be easily overlooked if an amateur tries to make one of these essential tools without professional supervision, which may end up hurting them and their cars.

Top 5 Benefits of Floor Jack Adapters 

  1. Safe to Use: The floor jack adapter is designed to make lifting and lowering a floor jack safer and easier. By providing the required support to floor jacks they ensure that the devices are stably grounded to solid surfaces they are placed on like concrete or wood.
  2. Easy to Install: Floor jack adapters are easy to install and can be used with a variety of different floor jacks. By simply placing them beneath the jacks and connecting the two securely they can be used together to lift powerful loads.
  3. Stable and Secure: The floor jack adapter is designed to provide a secure and stable platform for the floor jack. This ensures that the floor jack is held firmly in place and does not move during operation.
  4. Versatile: Floor jack adapters can be used with a variety of different floor jacks, for the triple pronged purpose of lifting, suspending and lowering loads, making it a great tool for mechanics, carpenters, and DIYers alike.
  5. Cost-Effective: The floor jack adapter is an affordable and cost-effective way to make sure that your floor jack is secure and stable during operation, preventing any threat to life (of the professional) and property (of the customers).

Simple Steps to Use Floor Jack Adapters

  1. Check the Floor Jack Adapter: Before using the floor jack adapter, it is important to make sure that it is securely attached to the surface. This will ensure that the floor jack is held firmly in place and does not move during operation.
  2. Check the Floor Jack: It is also important to make sure that the floor jack is securely attached to the adapter. This will ensure that the floor jack is held firmly in place and does not move during operation.
  3. Secure the Floor Jack: When using the floor jack, it is important to make sure that it is securely in place. This will ensure that the floor jack is held firmly and does not move during operation.
  4. Secure the Floor Jack Adapter: Next, attach the adapter to a secure surface such as a concrete floor or a workbench and connect it to the floor jack securely and use the floor jack as you normally would.
  5. Follow Safety Precautions: Finally, when using the floor jack adapter, it is important to follow all safety precautions. This includes wearing appropriate safety equipment and using the floor jack according to the manufacturer’s instructions.

Also Read: How to Use Auto Hydraulic Jacks

Floor Jack Adapters from Reputable Jack Manufacturing company is our top picks:

  • MODEL 6402 
    • Truck adapter/ 2″ tall spacer (1pair)
    • Applications: J6000H, J7500H, J7000L, J9000H 
  • MODEL 6407
    • Truck adapter/ 3.5″ tall spacer (1pair)
    • Applications: J6000H, J7500H, J7000L, J9000H 
  • MODEL 6408 
    • Truck adapter/ 8″ tall spacer (1pair)
    • Applications: J6000H, J7500H, J7000L, J9000H 
  • MODEL 6452 
    • Truck adapter/ 2″ tall spacer (1pair)
    • Applications: J6000H, J7500H, J7000L, J9000H 
  • MODEL 15450 
    • Low profile adapter for Models J12000H, J15000H, J18000H (1 Pair) 
  • MODEL 25770 
    • Low profile lifting adapter (1 Pair) For use with Models: J25000H, PJ25S 
  • MODEL 6403 
    • Square Lifting Adapter for use with Models J6000H/J7000L/J7500H/J9000H series jacks 
  • MODEL TJ24710 
    • Low Profile Lifting Adapter
      4″L x 4″W x .5″H 
  • MODEL TJ12770 
    • Differential Adapter / Pumpkin Adapter Cradles pumpkin on the banjo housing 
  • MODEL TJ12790 
    • Transmission Adapter
    • Ideal for installing or removing large or heavy parts 

get in touch!

Categories
Floor jacks Hydraulic Jacks

How to Use Auto Hydraulic Jacks?

Auto Hydraulic Jacks: Step-by-Step Guide
Auto Hydraulic Jacks: Step-by-Step Guide

Auto hydraulic floor jacks are perhaps the biggest asset you can own for the service, maintenance and repairs of your vehicles. There are following reasons for that:

  • Size and Portability- Most floor jacks are designed to occupy less space, and are therefore lighter than other jacks, making them portable enough to be carried around.
  • Does Not Jam- Since these jacks use hydraulic power to work, they are less likely to jam due to rust in the screw thread as unlike mechanical jacks which work by using them.
  • Weight Capacity- As hydraulics generate greater lifting force, these floor jacks can lift heavier loads compared to other jacks with minimum effort using fluid mechanics.
  • Lift Range- This increased lifting force allows them to lift loads to greater heights, giving them a higher lift range.
  • Simple to Use- It is easier to use as its working mechanism is simple, making it a convenient choice for a range of clientele, especially do it yourself-ers (DIY-ers).
  • Durability and Reliability- Because of hydraulic jacks’ fewer moving parts, and fine quality build materials like high-grade steel, they can stand the corrosion, rust, oxidation, deterioration, and wear and tear of lifting for decades to come.
  • Low Profile- Hydraulic floor jacks usually have an extended and elevated reach while offering sustained and stable lift and minimal upkeep needs.
  • Safety- Auto floor jacks engage automatically at different heights, lifting the entire front or rear of your vehicles without any danger.
  • Maneuverability- Hydraulic floor jacks often come with roller wheels that guarantee ease and impressive mobility, while making them highly adjustable.
  • Versatility and Flexibility- Some hydraulic floor jacks fit virtually any pit or ramp application due to their compact design.

How Do Auto Hydraulic Floor Jacks Work?

To understand the benefits of auto hydraulic jack, let us understand how hydraulics in jacks work. Where conventional jacks wear out easily, hydraulic floor jacks are commonly used to lift loads high and heavy with ease, safety and speed for any maintenance purpose.

Its components work in accordance with Pascal’s law (also known as Pascal’s principle, or the principle of transmission of fluid-pressure), to produce applications in a range of fields beyond the automotive industry.

But for the sake of this blog, we will only explore its mechanism in helping lift heavy duty military grade trucks and buses to smaller and lighter family cars off the ground for repairs and maintenance.

Hydraulic floor jacks are mechanical devices used to lift heavy loads and forces like trucks, sports utility vehicles, or other types of cars, among other heavyweight items. The anatomy of any auto hydraulic jack can be broken down into these main parts, namely:

  • Reservoir or buffer tank
  • Pump with piston or plunger
  • Pump lever or handle
  • Check valve
  • Main cylinder or ram
  • Release valve
  • Handle

The reservoir or buffer tank is the physical compartment of the floor jack which holds the hydraulic fluid or pump oil. When the handle or lever of the pump with piston or plunger is mechanically lowered or raised, it builds up pressure in the adjoining compartment, i.e., the reservoir or buffer tank containing the hydraulic fluid or pump’s oil.

This applied pressure is transferred from the pump through a check valve and into the main cylinder or the ram, which extends out of the jack body creating the required lifting force and lifting the load.

How to Use Auto Hydraulic Floor Jacks?

It is relatively simple to use hydraulic floor jacks. But we must warn you that before you proceed with anything technical, please take the necessary precautions (which must come along with your product usually in the form of a manual) as dealing with these devices are quite dangerous and can be life-threatening if not used with caution.

Do not allow children to come into contact with these devices and tools, and for the safety of your car and other property, follow the instructions diligently. Now, without further ado, let us get started, shall we?

1. Make sure your car is in gear and you have got your parking brakes engaged.

2. For safety reasons, unless you are in a state of emergency, get your park parked on a flat, levelled, solid surface like concrete and not grass and dirt.

3. Check out the jack points- a point on the chassis which contains the frame carrying all suspension and power components, in the undercarriage of your vehicle that is underneath the main cabin of your car- and distinguish between good and bad points.

4. For distinguishing between good and bad jack points, a preliminary inspection of your car’s undercarriage (and in case you are still confused, a quick Google Search) is sufficient- this will allow you to fix your auto hydraulic jack to a point that is designed to handle a lot of weight.

5. Once you have settled on your jack point that can jack up your whole car (or parts- rear or back) at once safely and easily, move the jack into place and lift your car steadily.

6. Once this is accomplished you can repeat the process for all the four corners of your car (or particular portions, like tires for replacement) to suspend it at the same level and work on its repairs and maintenance with ease.

Best Auto Hydraulic Floor Jacks to Use in 2024

You will realize that while using hydraulic floor jack stands become a necessity for their reliable and safe suspension. But it is an expensive investment. That is why Stan Design Inc. came up with hydraulic floor jacks that do not need stands. Check out our selection of their top auto hydraulic floor jacks.

get in touch!

Categories
Floor jacks Jacks Truck Jacks

Rolling Bridge Jack Installation & Operation Manual Guide

Scorpion Floor Jacks: Engineered for Heavy-Duty Tasks
Scorpion Floor Jacks: Engineered for Heavy-Duty Tasks

What are Rolling Bridge Jacks?

Bridge jacks, or rolling bridge jacks as they are alternatively known, are rolling jacks that essentially help you only if you operate or own a lift, more commonly known as a four post (or 4-post) lift. They are generally built with high grade steel and the finest quality components to be durable in the lifting process, by going into the open space between the two runways.

Their grease fittings for maintenance, specialized materials for durability, and durable finishes for sustainability allow them to work with almost any aboveground lifts. This not only makes them universal, but ideally suited to any of the following lifts: Rotary, Bend-Pak, Challenger, Forward, WheeltTonics, Snap On, Hoffman, John Bean Company, Western, Benwill, Globe, Stertil-Koni, ARI-HETRA, Giro-Lift, Stenhoj and Hunter.

In-depth Installation Guide & Operation Manual for Rolling Bridge Jacks

⚠WARNING: StanJacks are simple to install but always remember that your safety depends on proper installation training so do not attempt to install this equipment unless you have it. Pay attention at all times. Use appropriate tools and lifting equipment. Stay clear of moving parts. Wear appropriate protective equipment during setup.

  1. Set up the rolling bridge jacks in accurate positions of the lifts – If you use a single jack, then do not use it in the middle of the lift, which may cause it damage. If using two jacks, then stack them on the ends, never closer to each other than 30% of the length of the runway of the lift.
  2. Set up the runway of the lift in accurate positions – Make sure the lift runways were installed parallel to each other with the distance between them equal along the entire length of the lift. If the lift runways are not parallel, moving the jack becomes difficult, forcing it off the utility rail, increasing its chances of falling and being damaged or causing injury.
  3. Set up the Air – Operated Hydraulic Pump accurately- You need to orient each rolling bridge jack such that the air-operated hydraulic pump is facing the lift’s cross tube, the outside of the lift. This makes it easier to route the integrated air lines and access the pump.

Why Choose Stan Design Inc. StanJack Bridge Jack Range?

Heavy-Duty Hydraulics or Air Bag – You can choose between hydraulic or air bag models depending on your preference and needs. Both options offer powerful and smooth lifting without any hand pumping required.

Multi-Level Safety – All Stan Jack rolling bridge jacks have a built-in safety lock mechanism that engages automatically at different heights. No need for additional stands or chocks to secure the vehicle.

Dual Hand Controls – All  rolling bridge jacks have a detachable remote-control pendant with two buttons: one to lift and one to lower. This ensures that you always have full control over the jack.

Stackable Adapters – All bridge jacks come with low and high adapters that can be stacked together to fit different vehicle sizes and shapes. The adapters are stored on the jack for convenience.

Special Roller Bearing Wheels – All Stan Jack bridge jacks have four full floating casters that allow for effortless rolling and maneuvering. The wheels are made of special roller bearings that reduce friction and wear.

Convenient Pull Handle – All Stan Jack bridge jacks have a pull handle that makes it easy to position the jack under the vehicle. The handle can also be extended for rear axles.

High Gloss Powder Coat Paint – All Stan Jack bridge jacks have a high gloss powder coat paint that protects them from corrosion and rust. The paint also gives them a sleek and professional look.

Zinc Plated Components and Accessories – All Stan Jack bridge jacks have zinc plated components and accessories that resist oxidation and deterioration. The zinc plating also enhances their appearance as well as the durability.

What is the Hydraulic Mechanism of Jack Operation Used by StanJacks?

Hydraulic rolling bridge jacks are mechanical devices used to lift heavy loads and forces like trucks, sports utility vehicles, or other types of cars, among other heavyweight items, while fitted into a lift. The reason why the Stan Design Inc. hydraulic system StanJack rolling bridge jacks make a great tool for truck owners is the agility it offers.

Its components work in accordance with Pascal’s law or the principle of fluid mechanics to produce applications in a range of fields including but not limited to the automotive industry.

Like any hydraulic jack, the anatomy of the Stan Design Inc. StanJack can be broken down into these main parts, namely:

  • Reservoir or buffer tank
  • Pump with piston or plunger
  • Pump lever or handle
  • Check valve
  • Main cylinder or ram
  • Release valve
  • Handle

The reservoir or buffer tank is the physical compartment of the hydraulic rolling bridge jack which holds the hydraulic fluid or pump oil. When the handle or lever of the pump with piston or plunger is mechanically lowered or raised, it builds up pressure in the adjoining compartment, i.e., the reservoir or buffer tank containing the hydraulic fluid or pump’s oil.

This applied pressure is transferred from the pump through a check valve and into the main cylinder or the ram, which extends out of the hydraulic rolling bridge jack body creating the required lifting force and lifting the load.

Stan Jack Bridge Jack Models to Choose From

StanJack J6000H

  • Capacity – 6,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”
  • Lowest Collapsed Height

StanJack J7000L

  • Capacity – 7,000 lbs.
  • Heavy-Duty Air Bag
  • Extended Lifting Height – Over 10.25”
  • Lowest Collapsed Height – Only 7”

StanJack J7500H

  • Capacity – 7,500 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 10.25”
  • Lowest Collapsed Height – Only 7”

StanJack J9000H

  • Capacity – 9,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”
  • Lowest Collapsed Height

StanJack J12000H

  • Capacity – 12,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height
  • Lowest Collapsed Height

StanJack J15000H

  • Capacity – 15,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”
  • Lowest Collapsed Height

StanJack J18000H

  • Capacity – 18,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height
  • Lowest Collapsed Height

StanJack J25000H

  • Capacity – 25,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height
  • Lowest Collapsed Height

StanJack J35000H

  • Capacity – 35,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height
  • Lowest Collapsed Height

StanJack J50000H

  • Capacity – 50,000 lbs.
  • Heavy-Duty Hydraulics
  • Extended Lifting Height
  • Lowest Collapsed Height

get in touch!

Categories
Floor jacks Jacks

The Versatility of Scorpion Floor Jacks: Beyond the Basics

Innovative Design of Scorpion Floor Jacks
Innovative Design of Scorpion Floor Jacks

Scorpion floor jacks are an exclusive line of heavy-duty jacks for trucks by Stan Design Inc. The product of our expert craftsmanship and innovative design philosophy these jacks are made using only the highest quality materials to ensure that they can stand the wear and tear of lifting for decades to come.

After researching automotive businesses and lifting jacks for years, we found out the primary issues of floor jacks and the concerns of the workshop technicians and mechanics regarding their continued usage. And not only them, but we also consulted with commercial garage owners and DIY enthusiasts to diversify our perspective.

Hence, our designers have crafted the most ingenious lifting solution for maximum security and efficiency that lifts even heavy-duty truck jacks within seconds. Our Scorpion floor jacks are built with the finest quality materials, to be durable, safe and reliable in all seasons, making them the best jack for sale in North America.

What is the Scorpion Floor Jack and How Does it Work?

A floor jack is a tool used to lift heavy loads like automobiles and machinery equipment and suspend them at a particular height in air to work on repairing their parts, maintaining and servicing them. Jacks can be of many types, depending on the purpose they fulfill, like rolling jacks, bridge jacks, or floor jacks.

These jacks mainly have two different types of mechanisms of operation- either hydraulic or mechanical. Scorpion floor jacks by Stan Design Inc. operate based on heavy-duty hydraulics or air motors which eliminates the need for cumbersome and exhausting mechanical hand pumping to lift loads, ensuring safety of the vehicle as well as the lifting professionals.

The hydraulic system used in floor jacks has a simple to understand working process that offers powerful and smooth lifting without hand pumping. Hydraulic systems consist of the following broad components– hydraulic oil, reservoir or buffer or oil tank, main cylinder or ram, release valve, control valve, check valve, lifting arm or pad, hydraulic pump with piston or plunger, and a pump lever or handle.

The reservoir or buffer or oil tank is the physical compartment of the floor jack that holds the hydraulic liquid or pump oil together when it is not in use along with the control valve which stays in a closed position to prevent the accidental flow of oil.

When the handle or lever of the hydraulic pump with piston or plunger is mechanically lowered or raised, it activates force and builds up pressure in the adjoining compartment, i.e., the reservoir or buffer tank containing the hydraulic fluid or pump’s oil.

This applied pressure transfers the oil from the pump through a check valve and into the main cylinder or the ram, which extends out of the hydraulic jack body creating the required lifting force and lifting the load.

Whether it is a rolling bridge jack or a floor jack, they aid customers by lifting and transporting heavy weights, industrial loads, cars, vehicles and machinery equipment for clamping, etc. in varying industries, like:

  • Aircraft
  • Automotive
  • Bridges
  • Cable tensioning
  • House moving
  • Construction
  • General industrial
  • Laboratory
  • Locomotive
  • Marine
  • Mobile home
  • Railroad
  • Shipbuilding
  • Shoring and stabilizing such as for tunnels and mines
  • Tractors & trailers

Features that Make the Scorpion Floor Jack a Game-changing Revolution

  • Operate With One Button – Lift A Truck in Seconds with the Push of a Button
  • Three Stage Locking Mechanism – Ensures Safety While Eliminating the Need for Vehicle Stands
  • Air/Hydraulic Design – Effortless Lifting Without the Need of Hand Pumping
  • Built To Last – Designed with the Highest-Grade Materials to Be Durable and Robust
  • Extreme Ease and Maneuverability – Four Full Floating Casters for Impressive Mobility
  • Low Profile High Adjustability – Small Footprint Floor Jack to Reduce Floor Space

How to Choose the Right Stan Design Scorpion Floor Jack

There is a list of factors to consider while choosing any floor jack model.

1. Weight Capacity: While shopping for floor jacks it is imperative to look for the weight capacity (expressed in tonnage) it is designed to lift. The Scorpion jacks are available in variants of 24000- 28000 lb.

2. Material: The construction or building of your pit jack, whether it is a steel jack or aluminum jack, is pivotal to assess its performance and sustainability. Steel jacks are naturally stronger than aluminum and useful for lifting heavier loads.

3. Lift Height: It must match the ground clearance of your vehicle to be low enough to slide under its clearance range and high enough to provide adequate space for maintenance and repairs. The Scorpion jacks lift over 36”.

4. Size: The size of your floor jack impacts its portability. The material of your floor jack contributes to its density, weight and size, affecting its portability and making it suitable for particular vehicles based on their respective sizes.

5. Safety: Perhaps the most important factor to consider while purchasing a floor jack is its safety features to prevent accidents and mishaps and ensure safe lifting of heavy loads. The Stand Design Inc jacks have built-in three stage locking mechanism eliminating the need for vehicle stands and ensuring safety.

6. Price: You may be tempted to go after floor jacks that seem cheap but remember affordability does not always determine quality. Seemingly cost-effective floor jacks may turn out to be more expensive in the long run.

7. Brand Reputation: Buying floor jacks from reputable sources, like Stan Design Inc. ensures good quality, warranty and customer service. It is not wise to make jack purchases from unreliable sources as it can turn out to be not only a bad decision but a potentially harmful one with dangerous ramifications.

8. User Feedback: Products like our Stan Design Inc. Scorpion floor jack come with authority as they are user tested and rated. Being on the market for years has given us unique insight into the clientele’s demands, which has helped us serve them better, garnering their love and adulation.

9. Compatibility with your vehicle: Not all jacks are suitable for all vehicles. Whether you own a truck or a SUV or other types of cars, it would influence the choice of your floor jack. Hence, checking the factors like size, portability, build, lift range, weight capacity, etc. is crucial.

Stan Design Scorpion Floor Jack Models You May Choose From

Scorpion TJ12S

  • Capacity – 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

Scorpion TJ12SL

  • Capacity – 24,000 lbs./12 Tons
  • Only 7.5’’ Collapsed Height
  • Lifts Over 15”

Scorpion TJ14

  • Capacity – 28,000 lbs./14 Tons
  • Only 8.25” Collapsed Height
  • Lifts Over 20”

Scorpion TJ12E

  • Capacity – 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”
  • 2 Extendable Arms

Scorpion MJ25

  • Capacity – 25,000 lbs./12.5 Tons
  • Lifts Over 36”
  • Heavy – Duty Trucks and Buses
  • Stackable Adapters Designed

Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications

get in touch!

Categories
Floor jacks Hydraulic Jacks Jacks

Benefits of Using Advance Auto Floor Jacks

Advanced Auto Floor Jacks: Key to Efficient Repairs
Enhance Your Garage with Advanced Floor Jacks

Auto floor jacks are tools or devices that are a must for commercial, military, as well as modern personal garages. As they come in handy for quick inspections of automobiles and their parts, their uses and benefits cannot be overstated.

Used mainly for the purpose of lifting, suspending, and lowering heavy loads like vehicles (even of the military grade) for service, repairs, and maintenance, auto floor jacks are a convenient and safe solution for workshop mechanics and professionals as well as individual do it yourself (DIY) enthusiasts.

These jacks have applications in a wide range of industries, apart from the automotive market, some of which are- aircraft, bridges, cable tensioning, house moving and mobile homes, construction, general industrial, laboratory, locomotive, marine, railroad, shipbuilding, shoring and stabilizing, tractors and trailers.

Auto Floor Jack- Mechanism of Operation

Auto floor jacks can operate using a variety of mechanisms, meaning that their parts can be made to work using various principles of scientific engineering and technology, like mechanical, electrical, hydraulic, air bags or air motors, hybrid, etc.

Of them, the hydraulic system of working, based on Pascal’s law (also known as Pascal’s principle, or the principle of transmission of fluid-pressure), is the most commonly used. From helping lift heavy duty military grade trucks to smaller and lighter family cars, hydraulic floor jacks come into use for any maintenance purpose.

To understand the benefits of hydraulic auto floor jacks, let us understand how hydraulics in jacks work. Where conventional floor jacks wear out easily, these jacks lift high and heavy with ease, safety and speed.

What are Hydraulic Floor Jacks?

Its components work in accordance with Pascal’s law to produce applications in a range of fields beyond the automotive industry, as discussed above. But for the sake of this blog, we will only explore its mechanism in lifting heavy trucks and buses off the ground for repairs and maintenance.

Hydraulic floor jacks are mechanical devices used to lift heavy loads and forces like trucks, sports utility vehicles, or other types of cars, among other heavyweight items.

The anatomy of any hydraulic floor jack can be broken down into these main parts, namely:

  • Reservoir or buffer tank
  • Pump with piston or plunger
  • Pump lever or handle
  • Check valve
  • Main cylinder or ram
  • Release valve
  • Handle

The reservoir or buffer tank is the physical compartment of the floor jack which holds the hydraulic fluid or pump oil. When the handle or lever of the pump with piston or plunger is mechanically lowered or raised, it builds up pressure in the adjoining compartment, i.e., the reservoir or buffer tank containing the hydraulic fluid or pump’s oil.

This applied pressure is transferred from the pump through a check valve and into the main cylinder or the ram, which extends out of the hydraulic floor jack body creating the required lifting force and lifting the load.

How to Choose Hydraulic Floor Jacks?

While choosing hydraulic floor jacks, there are just a few specifications that you need to keep in mind.

Check the features like build or material- whether heavy like steel or portable like aluminum- size and weight or load capacity, lift range, price and quality, safety offerings like locking mechanisms, and finally the brand reputation and user reviews of the product and client testimonials of the business or brand.

Benefits of Using Auto Floor Jacks in 2024

Size, Weight and Portability– Most floor jacks are designed to occupy less space, and are therefore lighter than other jacks, making them portable enough to be carried around.

Hydraulic Power Does Not Jam– Since these jacks use hydraulic power to work, they are less likely to jam due to rust in the screw thread as unlike mechanical jacks which work by using them.

Weight Capacity– As hydraulics generate greater lifting force, these floor jacks can lift heavier loads compared to other jacks.

Lift Range– This increased lifting force allows them to lift loads to greater heights, giving them a higher lift range.

Simple to Use– It is easier to use as its working mechanism is simple, making it a convenient choice for a range of clientele, especially do it yourself-ers (DIY-ers). Some can even lift heavy-duty trucks in seconds with the push of just one button.

Effective with Heavy Loads– Loads are lifted with minimum effort as hydraulic mechanisms make it easier to lift heavy and high using fluid mechanics.

Durability and Reliability– Because of hydraulic jacks’ fewer moving parts, and high-quality and the finest grade build materials like steel, it can stand the corrosion, rust, oxidation, deterioration, and wear and tear of lifting for decades to come.

Low Profile– These jacks have an extended and elevated reach while offering sustained and stable lift and minimal upkeep needs.

Safety– The built-in three-stage safety locks in some auto floor jacks engage automatically at different heights, lifting the entire front or rear of your vehicles without any danger, eliminating the need for additional stands or chocks.

Maneuverability– Some auto jacks come with four full floating casters that guarantee ease and impressive mobility, while making them highly adjustable.

Versatility and Flexibility– Some hydraulic floor jacks fit virtually any pit or ramp application due to their compact design (only 7.5-8.25” collapsed height).

Attractiveness– Most of these floor jacks have a high gloss powder coat paint and zinc plated components and accessories that enhance their appearance and functionality.

5 Best Floor Jacks for Sale that Use Hydraulic Mechanism of Operation

1. Scorpion TJ12S

  • Capacity- 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

2. Scorpion TJ12SL

  • Capacity- 24,000 lbs./12 Tons
  • Only 7.5’’ Collapsed Height
  • Lifts Over 15”

3. Scorpion TJ14

  • Capacity- 28,000 lbs./14 Tons
  • Only 8.25” Collapsed Height
  • Lifts Over 20”

4. Scorpion TJ12E

  • Capacity- 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

5. Scorpion MJ25

  • Capacity- 25,000 lbs./12.5 Tons
  • Lifts Over 36”

Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications

get in touch!

Categories
Floor jacks Hydraulic Jacks Jacks

How to Use Floor Jacks without Stands in 2024?

Safely Using Floor Jacks Without Stands
Safely Using Floor Jacks Without Stands

What are Floor Jacks?

Floor jacks are hydraulic or mechanical jacks that are used to lift heavy loads like vehicles for maintenance and repair purposes. From lifting to suspending them at heights permissible for performing those services to then lowering them securely afterwards, these jacks do it all.

Factors Affecting the Performance of Floor Jacks

Whether they use the hydraulic- fluid mechanics- or mechanical- manual operation- mechanisms of operations goes a long way to determine not only the types of loads they can lift but also the convenience they offer the professional or do it yourself (DIY) enthusiast.

Depending on their size and material used to build them- like steel or aluminum- their weight capacity- that is, their ability to lift heavy loads of different weights- varies. Steel jacks are generally of a sturdier build than aluminum jacks, making them bigger or heavier in size than them.

This size difference obviously affects the portability of these aluminum and steel jacks, making them more suitable for one activity or the other. For example, floor jack with stands that are portable mostly have casters or roller bearing wheels making them easy to roll under vehicle chassis or undercarriages.

This ease of maneuverability may not be available for bigger jacks that are perhaps employed in service pits of commercial garages and workshops and are used to lift greater loads like bigger cars such as sports utility vehicles (SUVs) and heavy-duty trucks.

Different Mechanisms of Operations of Floor Jacks- Hydraulic Vs Mechanical

To understand how a mechanical jack works, it is first important to learn about its main components, which include:

  • Screw or worm gear
  • Handle
  • Lifting arm or pad
  • Support or stabilizing legs

The mechanism of operation or function of a mechanical jack is relatively easy and straightforward to understand. It relies on the principle of mechanical advantage. For the uninitiated, mechanical advantage simply means a denotation of a measured force.

In the working of a mechanical jack, the mechanical advantage is based on the principle of the screw. The pitch of the screw determines it. An increased pitch gives a greater mechanical advantage, which results in the easier lifting of heavier loads. Whereas a decreased pitch does the vice versa.

Like mechanical jacks, these hydraulic jacks also have a rather simple mechanism of function or operation. Its components can broadly be listed as:

  • Hydraulic oil
  • Reservoir or oil tank
  • Control valve
  • Hydraulic pump
  • Lifting arm or pad
  • Piston

The reservoir or oil tank holds the hydraulic liquid or oil. The control valve stays in a closed position when the jack is not in use to prevent the accidental flow of oil. The hydraulic pump activates the force or pressure necessary to move the oil that helps in lifting the load.

Step to Using Floor Jack with Stands

Floor jacks with stands are an easy solution for all your automobile lifting and servicing needs. Simply knowing the basics can do the right thing. So, here is us sharing the tricks of the trade with you. Gear up!

  1. Position the jack under your vehicle, regardless of its size, but in consonance with your vehicle’s ground clearance.
  2. Ensure that the lifting pad situated on the face of floor jack is in contact with the lift point on the underside of the vehicle.
  3. Manually lift the car by operating the jack handles, suspending it with the help of jack stands, and then performing your repairs.

Now, hold up here and think! In today’s age of technology and precision, do you still need to lift heavy cars manually and rely on cumbersome jack stands?

Do you need Jack Stands?

Jack stands basically act as support systems for your cars when they are being suspended after being lifted for installations, services, maintenance, or repairs. Traditionally, they have provided great and reliable results as resources for professional workshops and commercial garages.

But their only drawback is that they are cumbersome and do not necessarily provide the best safety net for lifted cars. This occurs mostly due to external factors like investing in cheap options for saving money or investing in lower weight capacities than vehicles that are being lifted.

Stan Design Inc. identified this rampant issue within the car servicing community and decided to actually do something about it. That is why they came up with a range of floor jack with stands that are versatile enough to work with or without jack stands.

Introducing Stan Design Inc. Scorpion Floor Jacks that Work Without Stands

After researching automotive businesses and lifting jacks for years our designers have crafted the most ingenious lifting solution for maximum efficiency. Our Scorpion Jacks are built with the finest quality materials, to be durable, safe, and reliable in all seasons, making them the best jack for sale in North America.

  • Operate With One Button- Lift A Truck in Seconds with The Push of a Button
  • Three Stage Locking Mechanism- Ensures Safety While Eliminating the Need for Vehicle Stands
  • Air/Hydraulic Design- Effortless Lifting Without the Need of Hand Pumping
  • Built To Last- Designed with The Highest-Grade Materials to Be Durable and Robust
  • Extreme Ease and Maneuverability- Four Full Floating Casters for Impressive Mobility
  • Low Profile High Adjustability- Small Footprint Floor Jack to Reduce Floor Space

These innovative jacks have revolutionized the floor jack market. In that, they have changed the system of requiring jack stands to suspend lifted cars on. By offering the three-stage locking mechanism, they not only eliminate the need for jack stands but also ensure that the cars are suspended safely.

Stan Design Inc. Scorpion (Stand-less) Jack Models to Choose From

1. Scorpion TJ12S

  • Capacity- 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

2. Scorpion TJ12SL

  • Capacity- 24,000 lbs./12 Tons
  • Only 7.5’’ Collapsed Height
  • Lifts Over 15”

3. Scorpion TJ14

  • Capacity- 28,000 lbs./14 Tons
  • Only 8.25” Collapsed Height
  • Lifts Over 20”

4. Scorpion TJ12E

  • Capacity- 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”
  • 2 Extendable Arms

5. Scorpion MJ25

  • Capacity- 25,000 lbs./12.5 Tons
  • Lifts Over 36”
  • Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications

get in touch!