Scorpion Pit Jacks/Lifts

PJ15

The Scorpion PJ15 Pit Jack is designed for use in Heavy Truck service pits or can also be used on above ground alignment ramp systems (HUNTER & BEE-LINE).

These jack will fit virtually any pit application due to their compact design only (34” wide) and expandable up to 42” wide.

These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi)

There is a built in lock for safety and other convenience features.

Features:

  • 15,000 Lb. Cap
  • Dual Hydraulic rams for lifting
  • Lift over 20” with a built in safety lock
  • Convenient pull handle,  powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling

PJ25

The Scorpion PJ25 Pit Jack is designed for use in Heavy Truck service pits or can also be used on above ground alignment ramp systems (HUNTER & BEE-LINE).

These jack will fit virtually any pit application due to their compact design only (34” wide) and expandable up to 42” wide.

These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi)

There is a built in lock for safety and other convenience features.

Features:

  • 25,000 Lb. Cap
  • Telescoping arms for wide pick up points
  • Lift over 20” with a built in safety lock
  • Convenient pull handle,  powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling

PJ12S

The Scorpion PJ12S Pit Jack is designed for use in Heavy Truck service pits or can also be used on above ground alignment ramp systems (HUNTER & BEE-LINE).

These jack will fit virtually any pit application due to their compact design only (31” wide) and expandable up to 46” wide.

These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi)

There is a built in lock for safety and other convenience features.

Features:

  • 12,000 Lb. Cap
  • Telescoping arms for wide pick up points
  • Lift over 20” with a built in safety lock
  • Convenient pull handle,  powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling

PJ15S

The Scorpion PJ15S Pit Jack is designed for use in Heavy Truck service pits or can also be used on above ground alignment ramp systems (HUNTER & BEE-LINE).

These jack will fit virtually any pit application due to their compact design only (31” wide) and expandable up to 46” wide.

These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi)

There is a built in lock for safety and other convenience features.

Features:

  • 15,000 Lb. Cap
  • Telescoping arms for wide pick up points
  • Lift over 20” with a built in safety lock
  • Convenient pull handle,  powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling

PJ25S

The Scorpion PJ25S Pit Jack is designed for use in Heavy Truck service pits or can also be used on above ground alignment ramp systems (HUNTER & BEE-LINE).

These jack will fit virtually any pit application due to their compact design only (32” wide) and expandable up to 46” wide.

These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi)

There is a built in lock for safety and other convenience features.

Features:

  • 25,000 Lb. Cap
  • Dual Hydraulic rams for lifting
  • Lift over 20” with a built in safety lock
  • Convenient pull handle,  powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling

PJ35S

The Scorpion PJ35S Pit Jack is designed for use in Heavy Truck service pits or can also be used on above ground alignment ramp systems (HUNTER & BEE-LINE).

These jack will fit virtually any pit application due to their compact design only (32” wide) and expandable up to 46” wide.

These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi)

There is a built in lock for safety and other convenience features.

Features:

  • 35,000 Lb. Cap
  • Telescoping arms for wide pick up points
  • Lift over 20” with a built in safety lock
  • Convenient pull handle,  powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling

Scorpion Installed Tire Service Lifts

Models: TJ12AG Above Ground – TJ12SG Semi-In-ground – TJ12IG In-Ground

The Scorpion Installed Tire service lifts are an ideal solution for those shops that perform a lot of tire service and Brake Service.  This is an installed version of the ScorpionTJ12 model  service jack and it offers a perfect combination of speed, effeciency, ease of use and value.  The Scorpion Installed lifts are much less expensive than your standard above-ground options or for that matter the in-ground options too.  Most of which are over $20,000.00 WOW!

The Scorpion installed lifts are under $10,000.00 That’s great value.

These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi)

There is a built in lock for safety and other convenience features.

The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.

Features:

  • 25,000 Lb. Cap
  • Dual Hydraulic rams for lifting
  • Lift over 20” with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor

Scorpion MJ25

Military Floor Service Jack

  • 25,000 Lb. Cap 12.5 tons
  • Extendable lifting beam with stackable adapters for all military vehicle applications
  • Two points of contact when lifting, safer!
  • Air/hydraulic design no pumping required
  • Lifts over 36” with a built in safety lock!
    (No need for vehicle stands!) WOW!
  • Full floating casters for easy maneuvering
  • Very small foot print doesn’t take up much room
  • A selection of three different saddles low/med/high
  • Saddle storage right on the jack!
  • Comfortable control handle extends up to 9 Ft.
  • Detachable remote control (great for spotting your load)

Scorpion TJ12E

12 Ton or 24,000 Lb. Cap. End Lift/ Bumper Jack for heavy trucks

The TJ12E lifts the whole front end or rear end in one go.  However in this case we are lifting on the frame of the truck or on the bumper of the truck.

The TJ12E has all the features of the TJ12S, including the three stage safety lock.  The top section has been changed to include two extendable arms that can reach out to wider pick up points.  Also included are stacking lifting adapters that allow you to adjust the pick up height for the various pick up points.

Submit Your Query