Stan Design

Categories
Bridge Jacks Fast Lube Floor jacks Hydraulic Jacks Jacks Pit Jacks

Best Jack Brand in 2024- 5 Points to Compare and Choose

The best vehicle jack brands are those that do not only provide you with high quality truck or vehicle jacks, but also exceptional customer service. 

They do not make promises of cheap prices as they acknowledge that cheap price tags come along with cheap products, yet they make cost-effective solutions. 

Nowadays, and this does not just apply to jack brands alone but to all modern-day brands, the verity of a brand can be identified through its testimonials. 

Along with these, there are many other criteria to judge and conclude any jack brand’s comparison effectiveness. Let us learn about the top 5 of those. 

5 Jack Brand Comparison Criteria 

  1. Experience– Perhaps the most important factor in determining the best jack brand among numerous others is the amount of time they have spent learning from and contributing to the industry. It is no secret that advancements in technology have changed the business landscape rapidly. Hence, whether a jack brand is the best in the market can be easily tested by looking at how they too have advanced in their product offerings- whether they have moved past traditional mechanical vehicle jacks to adopt newer offerings like effortless hydraulic systems, etc. 
  2. Product Features– Continuing from the above point, checking out the jack features of the brand you select to choose from is essential before making a purchase. Modern features in jacks like one-touch button-operated lift systems, low-profile height adjustability and portability, floating casters and rolling bearings, etc. are an indelible mark of technological adoption and advancement. Whether a jack brand offers these product features along with others that are tailored to fit your specific needs and address your concerns must be deliberated upon.  
  3. Product Range– Next, after checking the variety of experience along with a jack brand’s amount of experience in the industry, as well as the variety of product features it offers, examining the variety or range of its products itself is imperative. The best jack brands should be offering more than one type of jack- being quite literally the jack of all trades (if not master of none). So, for instance, if you are on a brand’s page because you are looking for floor jacks, you must be able to check out their range of screw jacks, pit jacks, rolling bridge jacks, etc. This will allow you to gauge their overall capability based on what people are saying about all their products. 
  4. Client Testimonials– Following from the preceding point, client testimonials go a long way in speaking for a brand’s goodwill. Review the testimonials carefully to see exactly what people are talking about. This will give you an exact idea of the brand’s offerings, be it their product features or their overall efforts to serve their customers. It will also tell you if they might not meet your expectations and if you are better off checking out other sellers. 
  5. Price Point– Finally, the price point of a brand determines its target audience, and therefore, a lot of its quality checking and analysis processes in the design, manufacturing, and service offerings. These end-to-end operations, in turn, determine their price point, giving the relationship between the two objective entities a causal character. Ultimately, the price of the jacks in today’s digital brand and business era ends up symbolizing a lot more than just cost price for the buyer. They represent tailored experiences that the buyer, aka you, would be purchasing. 

How to Research Best Jack Brands in the Market? 

When you Google (or Bing, if you may) “Top jack brands” or “Best jack brands” or “Best vehicle jack brand” or “Best truck jack brands”, chances are the top results would appear based on their efforts rather than the actual quality of the brands. 

And let us be real- Modern research method is hardly offline, like most other things. With this major online shortcoming as well as its impersonal manner, it becomes difficult to know the efficacy of the product you are looking for unless you try it yourself (which ends up costing you dearly). 

But do not worry. All is not lost. You can run a quick comparative analysis of all the top search results and conclude in no time! To get you started, we cover our top pick- Stan Design Inc. 

The Best Jack Brand in Canada 

Stan Design is the best truck jack brand in Canada and North America, comes with over 25 years of experience in the vehicle jack industry. They work in both designing and manufacturing high-quality engineered jack products for the target markets. 

At extremely cost effective and efficient price points, they offer a range of vehicle jacks including Scorpion line of floor jacks and pit jacks, and StanJack line of rolling bridge jacks and fast lube jacks, that have lifting capacities to lift even military vehicles. 

This auto jack manufacturer delivers premium jacks designed with cutting–edge technology that are safe, reliable and stand the test of time. Their variety and range enable them to offer portable as well as fixed pit solutions. 

How do you know that Stan Design Inc. is the best vehicle jack brand in the market? If the proof of work and customer testimonials are not enough, here is how they add even more value to you by offering mastermind business solutions. 

Their fast lube jacks allow you to offer tire rotation services, along with makes oil and lubricant changes. Industry statistics shows you could earn about $24,000 a year just from offering tire services to your customers. 

Conclusion: 

To sum it all up, there are a few factors that you should bear in mind while deciding on a jack brand. 

Among them the top 5 are the brand’s experience in the industry in terms of both quantity and variety, product features and range, client testimonials and price point. 

When you compare jack brands in the market, along with these objective factors, which can be an effective starting point, you should consider your own specific requirements. 

Finally, remember, a jack is only as good as its condition. A jack’s longevity ultimately depends on how you use to store and maintain.

Categories
Jacks

Calculating Jack Load Capacity Requirements

Importance of Load Capacity in Jack Selection

The load capacity of different jack types is determined by the amount of weight it is designed to carry. Based on the mode of operation of a jack type, whether mechanical or hydraulic, its load capacity may vary widely. 

Usually measured in pounds or kilograms, a typical jack type has a load capacity ranging from 2,000 to 5,000 pounds (about 2267.96 kg), with heavy-duty jack models handling up to 10,000 pounds (about 4535.92 kg) of weight. 

The importance of load capacity in selecting a jack type is great because it directly affects the health of the lifting, suspending and lowering process, as well as the safety of the personnel and the vehicle involved. 

In other words, if a smaller jack is employed to lift heavy trucks beyond the load capacity of the jack, for instance a generic floor jack or scissor jack, then it is bound to fumble the process and damage your vehicle and may inflict indirect but severe bodily harm to the people nearby. 

On the other hand, even using a heavy-duty jack for lifting small cars is not recommended. Even though it might sound like a harmless idea, in our experience such cases reduce the speed of lifting when smaller weights are involved. 

Since the jacks have heavier infrastructure for lifting small cars, knee-jerk reactions within the machinery allow sustained injuries on the car being lifted. 

Jack Types and Load Capacities

The above discussion paves the way for comparing the most common jack types and their different load capacities. 

  1. Floor Jack – These are the most popular jack types used in lifting heavy weights, be it small cars or heavy-duty military-grade trucks. Their load capacities vary according to the type of car they are used to lift. For instance, the Scorpion floor jacks by Stan Design Inc. are built to lift anywhere from 24000 lbs.- 28000 lbs. 
  2. Fast Lube Jack – These are manually operated machines that aid in tire servicing like tire rotation, lube servicing etc., transforming your commercial garage into a proper automobile station. For instance, the fast lube jacks by Stan Design Inc. are built to lift anywhere from 6000 lbs.- 9000 lbs. 
  3. Rolling Bridge Jack – These jacks allow a special type of lifting, by aiding automobile lift systems found in big garages. These are very costly and are prone to malfunction. For instance, the rolling bridge jacks by Stan Design Inc. are built to lift anywhere from 6000 lbs.- 50000 lbs. 
  4. Pit Jack – These tools are jacks specially designed for fitting into service pits of commercial garages or automotive shops. For instance, the pit jacks by Stan Design Inc. are built to lift anywhere from 12000 lbs.- 35000 lbs. Not only that, but they are also built with powerful air motors for lifting in a few seconds. 

Calculating Load Requirements

Calculating Load Requirements 

Calculating the load capacity for jack types involves understanding the mechanics of the jack and the weight it needs to support. This is the part where it gets technical. 

Here is a basic formula to calculate the force required for a jack without considering friction:

F=2πRQp

Where:

  • ( F ) is the effort force at the end of the arm or handle (in lb or N) 
  • ( Q ) is the weight or load (in lb or N) 
  • ( p ) is the pitch – distance or lead of thread in one turn (in inches or m) 
  • ( R ) is the lever-arm radius (in inches or m) 

We will not bore you further with information that you need not confuse yourself with. This should be taken into account by manufacturers before they design jack variants for specialized processes. 

In fact, this is an important step in distinguishing whether your provider understands your requirements and can furnish you with the right tool or not.

Factors Affecting Load Capacity

There are several common factors that affect the load capacity of all jack types. Below we will discuss 3 of these which are comprehensive enough to be applicable universally. 

  1. Mode of Operation – Whether the jack operates on a mechanical, electrical, hydraulic, air motor powered, hybrid, or any other mode greatly affects its load capacity. This happens because some jacks require mechanical hand pumping to lift a particular load while other modern and more efficient lifting systems like hydraulic jacks can lift loads easily within a few seconds with the push of a button or two.  
  2. Environmental Factors – Where the jack is placed- that is, its immediate physical environment- before and after its use is extremely important in determining not only its load capacity but also its longevity. A dirty and damp environment will often cause oxidation and lead to corrosion of parts, rendering the tool unsafe to use or worse, virtually ineffective. 
  3. Build Material – This determines the load capacity of each jack type, along with other physical attributes like its size and portability. Whether a jack is made of high-grade steel with fine iron bearings or regular plastic material determines how much load it can lift. Also, a bigger jack can lift heavier loads and vice versa. 

Stan Design Inc. Jack Types with Different Load Capacities 

Stan Design Inc. is the most reputable and trusted name in the truck jacking industry in Canada and North America. 

With over 25+ years of experience in the field of designing and manufacturing jacks like floor jacks, pit jacks, rolling bridge jacks, fast lube jacks, etc., they are the masters of understanding your requirements- whether for personal or commercial use- and helping you accordingly. 

You can browse the second section of this blog itself to arm yourself with crucial information about the load capacities of their different jack types. 

Not only do they provide jack types with a wide range of load capacity, but they also manufacture jacks in both air bags and hydraulic design variants. 

This empowers you to load and lift your vehicles effortlessly and safely without feeling a hole burning through your pockets! 

 

Categories
Jacks Truck Jacks

How to Properly Maintain and Store Your Truck Jacks

Understanding the Importance of Regular Jack Maintenance

Trust us when we say this, you do not want to mess with the storage and maintenance of your heavy-duty jacks such as military grade truck jacks. Or, for that matter, even your regular car jacks. 

The correct and safe usage of car jacks is an essential and fundamental life skill that every driver should possess. And with the need for usage comes the responsibility of maintaining and storing them correctly. 

It is a common perception that heavy duty jacks or military-grade jacks lose their vigor over time. What does that mean? To solve the problem we need to break it down into small tangible chunks. 

Simply put, ‘losing vigor’ in the context of jacks can mean anything from physically breaking down (including malfunction of constituent parts and units) to mechanically shutting off (for instance hydraulic fluids drying up in hydraulic jack systems. 

From operating inefficiently (like lifting or lowering slower than it used to) or degrading in quality (due to rust or corrosion) to hindering productivity or becoming unsafe or outdated for continued usage, to name a few among other things. 

And well sure, most of these issues are bound to happen over a considerable period of time after sufficient usage, they can still be effectively handled to be postponed by enhancing their longevity simply by storing and maintaining their carefully. 

After all, jacks like heavy duty jacks or military grade jacks are essential tools for the maintenance of the long-term operational health of your vehicle, as well as your emergency aid for quick and cheap automotive fixes.

However, it is no rocket science, everyone can do it with a little patience and our guide. Happy learning! 

Checklist For Regular Inspections – Common Mistakes to Avoid

The first step to maintain truck jacks properly is to create a robust checklist for regular inspections, as it would not only help you easily avoid common mistakes associated with the process, but also save you time and money in the long run.

Read our comprehensive checklist for avoiding the top 3 mistakes people make while using and maintaining jacks. Feel free to refer to it for getting started.

  1. Prevention is cure. That is why choosing the right jack for your vehicle tops our list. If your jack is compatible or its weightlifting capacity, its portability and size, its profile, etc.- with your vehicle then it automatically lowers the possibility of injuring itself, your car, or the person wielding it (including yourself). 
  2. Knowing its type. Understanding the method of operation of your jack- that is, whether it is a hydraulic jack or an air bag jack, for instance – will enable you to know where and what to look at for inspecting its health. For instance, hydraulic fluids naturally run out after continued usage, needing refills without which the jacks refuse to function properly. So, keeping it in check can take care of that issue. 
  3. Keeping a lookout for dents or broken parts on and of your jack. This is a clear giveaway that your jack is set to malfunction sooner rather than later and you might want to get it fixed before it hurts you- something most people tend to ignore, ultimately paying dearly for it in times of distress. 

5 Easy Steps to Maintain, Clean, and Lubricate your Jack

There is no easy way of putting it but the longevity of jacks- be it heavy duty jacks, military grade jacks, regular bottle or floor jacks, scissor or pit jacks, or any other variant- solely depend on your quality of storage and maintenance.

So, here are 5 easy steps to maintain, clean, and lubricate your Jack. We will cover their proper storage techniques and ideal storage conditions in the following section before ending this blog.

  1. Set up a maintenance routine to keep inspections regular without forgetting about it. Even though jacks rarely demand attention and can be inspected two to three times a year, it’s important to watch for unusual issues and do not hesitate to consult professionals as not all repairs are DIY (do it yourself) friendly. 
  2. Release pressure before putting away the jack. Bleed the cylinders regularly before storage when the jack seems to strain in lifting and supporting loads. Not only does releasing the pressure make the tool more compact and easier to store, but it also releases stress on the system that can contribute to the deterioration of various components, enhancing its overall performance. 
  3. Use a damp cloth to clean the dirt before it settles and gets sticky. Grease, the numerous lubricant for most jacks, tends to attract a lot of dirt because of its texture and character. Settled dust and the moisture from the grease can lead to the deterioration, rusting and clogging within mechanical and structural components. 
  4. Use quality oil, grease, or hydraulic fluid to lubricate your jack as and when necessary. This will reduce unnecessary friction which leads to premature wear and tear within the mechanical and structural components of jacks. It is a contributing factor in ensuring the long-term health of your jack. Regularly inspect for oil levels (in hydraulic jacks) and refill it accordingly. 
  5. Keep the cylinders dry and out of water. You should make every effort to ensure that water does not get into the system and mix with oil. In the unfortunate event that the water mixes with oil the floor jack tends to become useless as far as the lifting capacity goes. 

Storage – Proper Techniques and Ideal Conditions

Perhaps, the easiest trick to solve in the puzzle of maintaining your precious little tool’s efficacy is the storage. 

Just store it in a clean and dry area, away from sunlight or moisture and you are good to go! 

This will not only help prevent rusting of essential components, but also save you the pain of losing a fine tool because of the smallest oxidation deterioration as it renders them completely useless. 

Also, All vehicles that are for sale or being imported into Canada must meet the Canada Motor Vehicle Safety Standards. Remember to store your jacks upright to prevent oil leaks, and follow the above instructions carefully and refrain from using low-quality products since they may end up destroying the overall functionality of the jack. 

Categories
Hydraulic Jacks Jacks

The Role of Hydraulic Jacks in Emergency Vehicle Maintenance

Whether you plan to hit the country road or take a short trip to the beachside, whether it is sunny or there is a forecast of rain, you must always be ready with a kit for the emergency maintenance of vehicles. And hydraulic jacks are an indispensable constituent component of the kit. 

Why Hydraulic Jacks? 

Hydraulic jacks work using the principle of Pascal’s law of fluid mechanics. Broken down, it means that when there’s an increase in pressure at any point in a confined incompressible fluid, that pressure change is transmitted throughout the entire fluid. 

In other words, any change in pressure applied to a fluid in a closed system is transmitted undiminished to all parts of the fluid and the container walls. When this principle is applied in hydraulic jacks today, it helps eliminate manual labour. Here is how. 

How Do Hydraulic Jacks Work? 

To understand simply the workings of a hydraulic jack, let us consider the example of a hydraulic system of operation, consisting of the following broad components:

  • Hydraulic oil, 
  • Reservoir or buffer or oil tank, 
  • Main cylinder or ram, 
  • Release valve, 
  • Control valve, 
  • Check valve, 
  • Lifting arm or pad, 
  • Hydraulic pump with piston or plunger, and 
  • Pump lever or handle.  

The reservoir or buffer or oil tank is the physical compartment of the hydraulic jack that holds the hydraulic liquid or pump oil together when it is not in use. The control valve stays in a closed position when the hydraulic jack is not in use to prevent the accidental flow of oil. 

The piston is responsible for lifting the heavy load or weight. It is usually mechanically activated by shifting the positions of the handle or pump lever attached to it. This movement builds up pressure in the hydraulic fluid contained inside the reservoir or buffer tank of the hydraulic jacks.

When the handle or lever of the hydraulic pump with piston or plunger is mechanically lowered or raised, it activates force and builds up pressure in the adjoining compartment, i.e., the reservoir or buffer tank containing the hydraulic fluid or pump’s oil, inside hydraulic jacks. 

The pressure created allows the fluid to move through a check valve into the ram or main cylinder, which then pops out of the main body of the hydraulic jack creating the force required to lift the load. 

This applied pressure is what transfers the oil from the pump through the check valve and into the main cylinder or the ram, which extends out of the hydraulic jack body. Finally, the release valve relieves the built pressure for easy retraction and lowering of the ram with the load on it, creating the required lifting force and lifting the load. 

Vehicle Jacks by Stan Design – Hydraulic Jack Systems 

Stan Design is the best jack manufacturer and designer in Canada and North America. It uses state-of-the-art hydraulic technology to design and manufacture some of the most advanced hydraulic jacks in the market at affordable prices, without compromising on the quality. 

With over 25 long years of experience in the industry, they have mastered the art and science of designing and manufacturing to delivering automotive lifting solutions, using the finest materials that last longer, perform better, are safe, reliable and stand the test of time, and look aesthetically stunning, while at it. 

By adhering to the strictest safety and quality standards in the industry, their products are tested and certified by reputable organizations such as CSA Group, UL, CE, ISO, etc. They also offer to the choose the right hydraulic jack for your fleet heeds to all our customers so that they can utilize our products to their full extent, something that is missing from other sellers in the market.

Stan Design product’s bridges the gap between the vacuum left by the lack of standardization of quality checks to measure the efficacy of compact automotive lifting solutions (like vehicle jacks that lift passenger vehicles) and those for heavy duty or armored military vehicles, by manufacturing jacks for both kinds and everything in between. 

Advantages of Stan Design Inc. Hydraulic Jacks:

  • Safety – Safety features in hydraulic jacks include an in-built 3-stage locking mechanism system that engages automatically at different heights, excluding the requirement of any extra stands or chocks to secure the vehicle. 
  • Convenience – The hydraulic jack lifts your vehicle with the touch of a button, well two- one to lift and one to lower- attached to a detachable remote-control pendant, and an extendable pull handle that makes it simple to position the jack under the vehicle. 
  • Maneuverability – All vehicle jacks have four full floating casters or wheels, made of special roller bearings that reduce friction and wear, allowing for easy rolling and maneuvering. 
  • Durability – Hydraulic jack is made of high-grade fine steel material and coated with a high gloss powder paint, along with zinc plated components and accessories that resist oxidation, deterioration, corrosion and rust, while enhancing their durability. 

Stan Design Hydraulic Jack Models to Choose From in 2024:

Categories
Fast Lube

Fast Lube Specialized Oil Handling Solutions for Garages in 2024

What are the benefits of a fast lube system?

In order to understand that we need to clarify what we mean by a fast lube. And no, it is not what you think. The context is automotive workshops and commercial garages. 

A fast lube service is fundamentally a specialized oil handling solution offered by commercial garages and automotive workshops to keep your vehicle’s lubrication system operative.

However, faulty or unsupervised fast lube systems can disrupt your vehicle’s performance. In fact, if technicians attempted to perform a quick oil change without using a proper fast lube system, they may accidentally injure themselves. 

At commercial garages, proper oil change procedures and specialized oil handling solutions are a less-than-common sight. And the ones that exist are less than effective. Below we will cover some of the main risks related to this. 

Risks Associated with Oil Changes:

  1. Oil Leak – The most common risk associated with oil changes in fast lube systems is the risk of oil leakage going undiagnosed and thus un-prevented. This can not only dirty the floor but also make the environment unhygienic and accident prone. Personnel involved in it may trip and fall, causing harm to themselves as well as heavy and expensive machinery usually kept in close proximity. 
  2. Lubricant Contamination – This can arise from both internal and external factors, accelerating the wear and tear rate dramatically, because abrasive wear can cause a chain reaction in lubricated machinery. 
  3. Dirty Oil Filter – This can be avoided by implementing preventative measures, but during a fast lube service, this can go unnoticed if the right fast lube equipment is not used. Which can further lead to increased engine wear, reduced lubrication, reduced engine performance, sludge formation, clogged oil passages, and a range of other problems. 
  4. Personnel Accidents – In a busy automotive repair shop, a technician attempted to perform a quick oil change without using a proper fast lube system. Due to the haste, the technician accidentally spilled hot oil on themselves, resulting in burns and injuries. This is not an uncommon story and can happen to you too. 

Scorpion Fast Lube Equipment:

The Scorpion Fast Lube Jacks allows you to offer tire rotation and tire service to your customers, and generate more revenue and profit for your business of core automotive workshop and garage services. 

These are designed to fit your pit and your budget. They are made of high-quality materials and components, and they have innovative features that make them easy to use and safe to operate. 

According to industry statistics, you can make at least $24,000 per year by offering tire rotation to your customers. That’s a lot of money for a small investment, like the North American Made Truck Jacks

Basically, specialized equipment like fast lube systems safely and efficiently handle oil changes, reducing the risk of accidents and injuries caused by manual handling of hot fluids. Scorpion Fast Lube equipment is an important addition to the cause. 

Specializing in the field of fast lube jacks – that operate using both hydraulic and air bag systems – Stan Design Inc. offer fast lube jacks, among other types like floor, pit and rolling jacks, of varying lifting capacity to cover your fast lube needs. 

Stan Design Inc. Scorpion Fast Lube Jack Features:

  1. Safety – Safety features in Scorpion products include an in-built 3-stage locking mechanism system that engages automatically at different heights, excluding the requirement of any extra stands or chocks to secure the vehicle. 
  2. Hydraulics or Air Bag Models – Scorpion Fast Lube Jack comes in 2 variants – powered by dual hydraulic cylinders or powerful inflatable air bags- to lift heavy vehicle in seconds without the need for rigorous mechanical hand pumping. 
  3. Convenience – The Stan Design Inc. Scorpion Fast Lube Jack lifts your vehicle with the touch of a button, well two – one to lift and one to lower – attached to a detachable remote control pendant, and an extendable pull handle that makes it simple to position the jack under the vehicle. 
  4. Maneuverability – All the Stan Design Inc. Scorpion Fast Lube Jacks have four full floating casters or wheels, made of special roller bearings that reduce friction and wear, allowing for easy rolling and maneuvering. 
  5. Durability – The Stan Design Inc. Scorpion Fast Lube Jack is made of high-grade fine steel material and coated with a high gloss powder paint, along with zinc plated components and accessories that resist oxidation, deterioration, corrosion and rust, while enhancing their durability. 

Stan Design’ Scorpion Fast Lube Jacks to Choose From:

Stan Design Inc. has been in the field of automotive jacks for over 25 years, which empowered them to research, design, develop and manufacture the Scorpion fast lube equipment with unparalleled safety features in Scorpion products used for proper oil change procedures and specialized oil handling solutions. 

Using the most advanced technology, by adhering to the strictest safety and quality standards in the industry, their fast lube jacks not only look aesthetically stunning, last longer, or perform better, but are also tested and certified by reputable organizations such as CSA Group, UL, CE, ISO, etc. 

Along with these features, their state-of-the-art machines and a crew of highly skilled and experienced engineers and mechanics and policies like warranties and after-sales support make them the most trusted jack manufacturers in Canada and North America.

Pit Jacks J6000HFL –

  • Capacity – 6,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 
  • Extended Lifting Height 
  • Lowest Collapsed Height 

Pit Jacks J7500HFL –

  • Capacity – 75,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 
  • Extended Lifting Height 
  • Lowest Collapsed Height 

Pit Jacks J9000HFL –

  • Capacity –9,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 
  • Extended Lifting Height 
  • Lowest Collapsed Height 
Categories
Floor jacks Hydraulic Jacks Pit Jacks Truck Jacks

Preventing workplace accidents how scorpion pit covers help

The story is not new. In fact, it has been run time and again while promoting pit cover accident prevention strategies and highlighting the risks uncovered pits pose to personnel and property in automotive workshops. 

During routine maintenance at a truck service center, a worker tripped and fell into an uncovered service pit, leading to severe bodily injuries and not to mention a temporary halt in operations. 

At commercial garages, pit safety solutions are a less-than-common sight. And the ones that exist are less than effective. Below we will cover some of the main risks of uncovered pits. 

Top 5 Uncovered Pit Risks

  1. Falling Risk – The numerous risk posed by uncovered pits is the obvious danger of falling into it. Especially, if their exterior outlines are not marked with a colored line as a warning sign, even though the efficacy of just a colored line alone for preventing such mishaps is debatable. The grave health hazard this sets for the personnel handling it daily is massive.
  2. Explosion Risk – Another risk of uncovered pits is the risk of explosion or fire and fumes. This usually happens when unusual chemicals are introduced in any manner (just forgotten and mixed up, even!) and arranged within the physical proximity of electrical wires or damp environments, which are often found in service pits. Even faulty machinery or equipment in automotive workshops and service pits can set off fire.
  3. Ventilation Risk – The point made above is both a cause as well as effect of the risk of ventilation. Poor ventilation or even the lack of one in service pits can lead to major risks to the overall health of the environment of the commercial garage within which it is located, even if it is uncovered. 
  4. Drainage Risk – This brings us to the point of drainage risks. Draining any kind of fuel near service pits unauthorized for such work is highly risky. Besides, uncovered and poorly ventilated pits release the hazardous atmosphere developed by fuel vapors within them into the open, harming both personnel and customers, not to mention the reputation of the establishment.

Top 5 Safety Features in Pit Covers to Look For:

  1. Panels – When looking for inspection service pit covers for your commercial garage or automotive workshop, you should pay special attention to their panels, that would not only that enhance safety but also the efficiency in an automotive service environment. Typically, depending on whether the cover is made of concrete, wood, plastic or some other material, you should check the pit liner to ensure durability and protection.
  2. Design – An important yet often overlooked safety feature in pit covers is their design. Do they accommodate space for safety rails to extend along the length of the pit, painted safety yellow, to guide vehicles, if the service pit does not already have it outline on its exterior? Is the texture of the pit cover composed of non-skid material for safety? These are yardsticks to judge a pit cover design by. 
  3. Capacity – The tolerance of the pit cover as well as the track surface, if at all it provides a track system feature at all, should be commensurate with its weight lifting capacity for top notch security. 
  4. Convenience – Most modern service pits come with the convenience of modern technology. Small storage units like a cup holder for the technician using the pit momentarily, or perhaps an installed intercom system for seamless communication between upper and lower units, or quick access toolbox holders – your modern pit cover should come with these facilities if you so wish for. However, it is on you to check whether they are inherently safe to use.
  5. Compatibility – Finally, the biggest safety feature in pit covers to look out for is their compatibility with your existing service pit systems like those provided by Devon and Uni-lube. Stan Design Inc. is one such company that has emerged as an industry leader in North America because of its design and manufacturing of pits that are universally compatible with the leading pit system brands.

Pit Safety Solutions – Scorpion Pit Covers 

The incident discussed in the beginning of the blog underscores the critical need for secure pit cover installation and pit safety solutions to prevent workplace accidents and ensure worker safety. 

Properly secured and durable pit covers are essential to minimize uncovered pit risks in service pit areas. The safety systems can be as simple as a fishing net strung across the opening. 

At Stan Design Inc., we examined all these systems and decided there was room for improvement. So, we bring to you Stan Design Inc.’s Scorpion Pit Cover PLC1000, important to avoid harm to vehicles as well workers. 

Apart from dropping right in to fit in like a glove and providing your existing pit facility with the safety and security it needs, the Scorpion Pit Cover PLC1000 offers extreme strength and resistance to all types of chemicals. 

Made from a proprietary plastic composite material, the fruit of labour of innovation, design and development genius of over two decades, Stan Design Inc.’s revolutionary new system has segments 2ft long and as wide as your pit. 

These segments are very light- only 12 lb./ panel- and slide onto one another with just a push, with each panel holding over 1,000 lb., hiding all the meanness of the oily mess below, giving your workshop a tidy and hygienic look. 

Give your customers the professionality they expect, while upgrading from unreliable pit safety systems and increasing your productivity. 

Categories
Bridge Jacks Fast Lube Floor jacks Jacks Pit Jacks Truck Jacks

Innovations in Truck Jack Technology: What’s New in 2024

Business owners throughout Canada are losing valuable time each day using slow and heavy duty pit jacks. These jacks require multiple stands and additional chocks to support the vehicles, resulting in significant inefficiencies.

Not to mention the risk of injury to body and damage to the vehicles they must brave every day with these conventional truck lifting solutions, which are devoid of any automobile industry innovations concerning safety locks or checks.

The truck jack industry has made some considerable advancements in jack technology in recent years but unfortunately has not been able to make it accessible to the masses. Meaning, for the individual buyer or small scale business consumers, it is still out of reach.

This leaves a major population of automobile consumers and the servicing industry with outdated and risky tools at their disposal for regular vehicle maintenance and repair purposes. At the height of its receiving end is the trucking industry.

It is no secret that the jack technology used for servicing heavy duty or military grade trucks needs to be commensurate with specialized truck lifting solutions like heavy duty pit jacks or Military Vehicle Lifting Solutions, and the likes.

That is why industry stalwarts (like Stan Design Inc., to name one) have come up with genius innovations that have revolutionized how professionals wield the truck jacks and the time and energy resources they expend on it. Read on to check the latest innovations.

Latest Jack Technology for Truck Lifting Solutions

  1. Safety Enhancements – Perhaps the biggest technological breakthrough in the truck lifting solution industry has been the installation of safety locks at regular intervals of different heights during the lifting and lowering process. Stan Design Inc., for instance, has introduced the in-built automatic three stage locking mechanism that ensures safety while eliminating the need for vehicle stands. Not only does this erase the risk of injuring oneself while operating a heavy duty pit jack, but also the probability of injuring the vehicle.
  2. Enhanced Lifting Capacity – With advancements in jack technology, the additional, and not to mention expensive, need for purchasing chocks and stands for support while lifting, suspending and lowering heavy duty or regular vehicles has finally been overcome. With more robust military grade jacks available (like Stan Design’s 20 ton lifting models) at affordable price points, the lifting capacity is intensified without additional expenses.
  3. Energy Saving – The points discussed above lead to reduced energy wastage for the personnel involved in operating these jacks. Besides, exclusive Stan Design Inc. jack features like lifting within seconds with just one push of an external button as opposed to mechanical hand pumping, enable by swift hydraulic systems and powerful air bags design offer extra support to any commercial garage operator.
  4. High Grade Durable Materials – Consumers have bought essential automotive tools like vehicle jacks earlier only considering low entry prices and have suffered for it over time. Now they have realized that durable materials come from the use of high grade fine steel jack bodies, quality coat paints that protect them from corrosion and rust and zinc plated components and accessories that resist oxidation and deterioration. Good for you, Stan Design Inc. has got them all!

Automobile Industry Innovations by Stan Design Inc.

Floor Jacks:

Scorpion TJ12S 

  • Capacity- 24,000 lbs/12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

Scorpion TJ12SL 

  • Capacity- 24,000 lbs/12 Tons
  • Only 7.5’’ Collapsed Height
  • Lifts Over 15”

Scorpion TJ14 

  • Capacity- 28,000 lbs./ 14 Tons
  • Only 8.25” Collapsed Height
  • Lifts Over 20”

Scorpion TJ12E 

  • Capacity- 24,000 lbs/12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”
  • 2 Extendable Arms

Scorpion MJ25 

  • Capacity- 25,000 lbs./ 12.5 Tons
  • Lifts Over 36”
  • Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications

Heavy Duty Pit Jacks :

Scorpion PJ15

  • Capacity – 15,000 lbs/7.5Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion PJ25 

  • Capacity – 25,000 lbs/12.5Tons.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion P12S 

  • Capacity – 12,000 lbs/6 Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ15S 

  • Capacity – 25,000 lbs/12.5Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ25S 

  • Capacity – 25,000 lbs/12.5Tons
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 32” Wide
  • Expandable Size – 46” Wide

Scorpion Installed Tire Service

  • Installed Version of TJ14
  • Designed to lift vehicle across axle
  • Capacity – 25,000 lbs/12.5Tons.
  • Dual Hydraulic Arms
  • Built-in safety lock
  • Extended Lifting Height – over 20”
  • Incredible value for money

Available Models

  • TJ14AG – Above Ground
  • TJ14SG – Semi-in-Ground
  • TJ14IG – In-Ground
  • Extended Lifting Height – Over 20”

Rolling Bridge Jacks

StanJack J6000H 

  • Capacity – 6,000 lbs/3 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”

StanJack J7000L 

  • Capacity – 7,000 lbs/3.5 Tons
  • Heavy-Duty Air Bag
  • Extended Lifting Height – Over 10.25”
  • Lowest Collapsed Height – Only 7”

StanJack J7500H 

  • Capacity – 7,500 lbs/3.75 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 10.25”
  • Lowest Collapsed Height – Only 7”

StanJack J9000H 

  • Capacity – 9,000 lbs/4.5 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”

StanJack J12000H 

  • Capacity – 12,000 lbs/6 Tons
  • Heavy-Duty Hydraulics

StanJack J15000H 

  • Capacity – 15,000 lbs/7.5 Tons
  • Heavy-Duty Hydraulics
  • Extended Lifting Height – Over 11”

StanJack J18000H 

  • Capacity – 18,000 lbs/9 Tons
  • Heavy-Duty Hydraulics

StanJack J25000H 

  • Capacity – 25,000 lbs/12.5Tons.
  • Heavy-Duty Hydraulics

StanJack J35000H 

  • Capacity – 35,000 lbs/17.5 Tons
  • Heavy-Duty Hydraulics

StanJack J50000H

  • Capacity – 50,000 lbs/25 Tons
  • Heavy-Duty Hydraulics

Fast Lube Jacks :

Pit Jacks J7500HFL 

  • Capacity – 75,000 lbs/37.5 Tons
  • Narrow 34.5” Top Beam
  • Heavy Duty Hydraulics

Pit Jacks J7000HFL:

  • Capacity – 7,000 lbs/3.5 Tons.
  • Narrow 34.5” Top Beam
  • Heavy Duty Hydraulics

Pit Jacks J9000HFL 

  • Capacity – 9,000 lbs/4.5 Tons
  • Narrow 34.5” Top Beam
  • Heavy Duty Hydraulics
Categories
Bridge Jacks Floor jacks Hydraulic Jacks Jacks Truck Jacks

Benefits of Investing in North American Made Truck Jacks

Truck jack benefits are myriad since these jacks are indispensable tools for repairing and maintaining your heavy-duty trucks. From portable floor jacks or bottle jack models to larger and heavier fixtures like fast lube rolling pit jacks, quality jack products come in every size and shape.

Here is the catch though! The word quality. This is essential in differentiating between conventional jacks and modern jacks made in USA/ Canada. What we mean by conventional jacks are truck jacks that are mass manufactured using low-quality materials to make them accessible to larger groups of customers.

The problem with this kind of a production model, although it might seem cost-effective at the first glance, is that they are not durable enough to last for a long time, nor do they work (mostly) without additional support equipment like chocks and stands, ultimately incurring more cost on the client.

Jack Manufacturing in North America

There is a rather simple solution to the problem discussed in the opening section of our blog – buying local. Simply put Stan Design, a jack manufacturing company in NorthAmerica, is the end-to-end manufacturing process of heavy-duty and other types of truck jacks made in USA/ Canada, including production, assembly, marketing, distribution, etc.

This process ensures that truck jack manufacturers adhere to strict manufacturing standards in place at their respective geographic locations, empowering the customers (that is, you) to be vigilant over the quality of jack products you are investing in. This also paves the way for a transparent manufacturing process that is imperative to boost the local economic health of the community, overall.

Since today’s consumers are more aware than ever before in the history of the national economy, they also collectively care about the ethical involvements of the companies they buy from. North American jack manufacturing companies like Stan Design Inc. not only source and manufacture products locally, but they also see to it that this process gives back to the society.

Besides, Stan Design Inc. takes immense pride in bringing together the innovative genius and the design expertise of the finest of Canada to give birth to the best truck jacks in North America which are a brilliant example of the confluence of the two. Their premium and compact lifting solutions are built with cutting-edge technology that are safe, reliable and stand the test of time.

5 Quality Truck Jack Product Benefits

  1. Cost Effective – Most truck jacks require additional chocks, stands or adapters to fully function. Not quality jack products. The best truck jacks’ benefits are that they are highly cost effective as they do not require these additional support equipment to deliver high quality lifting solutions.
  2. Safe and Durable – Perhaps the most important thing anybody would be looking for in the list of truck jack benefits is the safety and durability they provide. Being made from high grade materials, that should not be a worry for consumers investing in quality jack products.
  3. Time Efficient – Businessmen like commercial garage or automotive workshop owners and managers across Canada waste countless hours every day choosing the right bridge jack for lifting heavy duty vehicles with slow, heavy, and cumbersome truck jacks that require multiple processes and additional products to support the lifting, suspension and lowering of trucks for repairs and maintenance. Quality jack products reduce this wastage of precious time and let them work on the more productive aspects of their business, increasing their revenue generation.
  4. High Grade Quality – Quality jack products are mostly made with high grade fine steel material that can easily bear the wear and tear induced by lifting heavy weights daily. Naturally, these robust products are more durable than ordinary truck jacks, eliminating the need for the customers to keep buying them over and over again.
  5. Reduces Manual Labour – Tools are meant to aid humans and make their work easy, not the other way around. And the best truck jack benefits list would be incomplete without mentioning that they reduce manual labour of hand pumping and other rigorous, time consuming, and unsafe and unreliable primitive methods of lifting and lowering heavy loads like heavy-duty trucks.

Best Jacks Made in USA/ Canada to Invest in 2024

Let us face it. Tire rotation, oil changes, brake system maintenance, etc. sound like unimportant tasks better off delegated to professionals. Unless we are in too deep.

Sure, for regular repairs and maintenance, we need to take our vehicles and trucks to workshops, but what about emergency road situations? YouTube videos may come in handy for learning instant rescue hacks, but what about the tools?

That is why you need to carry portable, yet rugged truck jacks made in USA/ Canada with you. And what better place to shop them from other than Stan Design Inc. With over 25 years of experience in the industry, they have mastered the art and science of designing and manufacturing to deliver only the highest quality jack products.

Their state-of-the-art machines are designed with the utmost care to make them robust, durable, and sophisticated with quality and innovation that are unrivalled by anything else in the market.

Their dedicated crew of highly skilled, creative and experienced engineers and mechanics work tirelessly to meet your specific needs and expectations, while adhering to the strictest safety and quality standards in the industry.

All of their products are tested and certified by reputable organizations such as CSA Group, UL, CE, ISO, etc. Stan Design Inc. also offer warranties and after-sales support to all our customers so that they can utilize their products to their full extent.

Canada’s Stan Design Inc. Scorpion Jack Models to Buy:

Scorpion Floor Jacks:

Scorpion TJ12S –

  • Capacity – 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”

Scorpion TJ12SL

  • Capacity – 24,000 lbs./12 Tons
  • Only 7.5’’ Collapsed Height
  • Lifts Over 15”

Scorpion TJ14 

  • Capacity – 28,000 lbs./14 Tons
  • Only 8.25” Collapsed Height
  • Lifts Over 20”

Scorpion TJ12E 

  • Capacity – 24,000 lbs./12 Tons
  • Only 8’’ Collapsed Height
  • Lifts Over 15.75”
  • 2 Extendable Arms

Scorpion MJ25 

  • Capacity – 25,000 lbs./12.5 Tons
  • Lifts Over 36”
  • Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications

Scorpion Pit Jacks:

Scorpion PJ15 

  • Capacity – 15,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion PJ25 

  • Capacity – 25,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 34” Wide
  • Expandable Size – 42” Wide

Scorpion P12S 

  • Capacity – 12,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ15S 

  • Capacity – 25,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 31” Wide
  • Expandable Size – 46” Wide

Scorpion PJ25S

  • Capacity – 25,000 lbs.
  • Dual Hydraulics Arms
  • Extended Lifting Height – Over 20”
  • Size – 32” Wide
  • Expandable Size – 46” Wide
Categories
Bridge Jacks Fast Lube Hydraulic Jacks

Rolling Jacks for Your Garage: Hydraulic Pit Jacks Vs. Fast Lube Rolling Pit Jacks

Phil Dunphy (Modern Family S11 E11 “Legacy” spoiler alert for those of who prefer to live under a rock), might have been “fortunate” enough to have witnessed “one local inventor (who) has been hard at work on the Presto-Jack™, a pneumatic device that both lifts a car and powers a drill to change lug nuts”, doesn’t mean you don’t get to benefit from the rare esoteric wisdom he soon gained.

Packaged in a rather beautifully emotional roller-coaster of a scene, the goof spent the day with his father, Frank Dunphy the said “local inventor”, trying to change a flat tire using Frank’s ill-fated and much too powerful invention called the Presto Jack™. This certainly makes for a wholesome character arc in a comedy series for, as the name suggests, modern families.

While the show had nothing to do with rolling jacks otherwise, its storyline always portrayed Frank and Phil Dunphy (the father-son duo) as a couple of happy-go-lucky lads who were always curious about learning and experimenting with odd things in life, no matter their age or level of experience.

Shortly after, People Magazine reported, “Modern Family Kills off Phil Dunphy’s Dad Frank After Their Emotional Final Scene Together”. This scene, which was a part of the episode, paid tribute to Fred Willard, who played the role of Frank on the show, for his death by natural causes both on and off the camera.

Presto Jack™- What a Rolling Jack Should NOT Be

While the role might have garnered Willard an Emmy nomination, such a local inventor would barely be awarded! Our key takeaways from this focus on highlighting the ill effects of using ill-fated essential products like rolling jacks. Phil learnt exactly 3 things about Presto Jack™ that day –

  1. The force applied to press the ‘Start’ button of the remote-controlled jack apparently directly affects its performance,
  2.  the ‘End Task’ button can only end the affected task’s performance positively if pressed on the right side of the button body not the left,
  3. and that “everybody warned” Frank that “this (the car blowing up, turning over, and effectively self-destroying) would happen”.

Rolling Jacks by Stan Design – Hydraulic Pit Jack Right for Your Garage

Believe it or not, Stan Design does NOT work like the Presto Jack™! It is a rolling pit jack, with heavy duty hydraulics as well as air motors, that caters efficiently and exclusively to your exact needs and preferences.
The hydraulic variant eliminates rigorous hand pumping and mechanical effort, while the air bags powered by powerful air motors provide precision in lifting.

Hydraulic pit jacks are some of the most common jacks used in the automotive industry which uses fluid mechanics to lift automobiles like heavy duty military grade trucks. Check out the reasons behind its immense popularity!

Top 5 Reasons for the Hydraulic Jack’s Popularity –

Popular because of the flexibility and mobility of their valves and arms, they offer agile solutions to your automotive needs like no other. Hydraulic pit jacks in general and the StanJack in particular, come with a set of adapters to accommodate servicing every car.

  1. Best Fast Lube rolling jack available in Canada because of its low and high adapters that can be stacked together to fit different vehicle sizes and shapes. The adapters are stored on the jack for convenience.
  2. By lifting and transporting heavy weights, industrial loads, lifting cars and vehicles for clamping, and clamping machinery equipment, hydraulic rolling pit jacks can aid customers in varying industries besides automobiles.
  3. Purchasing the right hydraulic rolling jack saves you time, energy and money whether you need one for industrial use or simply personal use as xxxxxxxxxxxxxxx`garage equipment. Hydraulic pit jacks like rolling jacks are designed to serve the purpose of working with great force
  4. Hydraulic pit jacks consist of two cylinders of varying sizes, and the bigger and smaller cylinders are connected. There are two pistons inside the cylinder responsible for lifting heavy weights. The small piston forces the fluid to lift the big piston. There are two ball valves that work as a check valve, allowing flow and stop the flow while pumping.
  5. A bar is inserted into the handle socket of the rolling jack. When pumped, the hydraulic fluid is forced by a piston and goes through a one-way valve. The fluid force acts at the bottom of the bigger cylinder, allowing the ram to go upwards. The other valve is blocked so pressurized fluid can’t back until it is unscrewed

What About the StanJack Air Bag Variant?

The Stan Design’s bag variant of Fast Lube Rolling Pit Jack stands out because of its unique functionality offered by motorized air power. These gentle giants lift your cars literally by inflating themselves with pumped air and help you service your automobile for repairs or maintenance.

Rolling jacks are essentially used along with lift systems, most notably the 4 post lifts, in commercial garages. When coupled with the power of durable air bags, they offer motor power that enables heavier and higher lifting prowess

These scissor style jacks go underneath the lift to reach the factory jacking points of the vehicle undercarriage, with pinpoint precision. This allows you to lift the car safely and securely without the worry of injury to life or property.

Top 5 Reasons for the Air Bag StanJack’s Popularity

Air bag fast lube rolling pit jacks are made of bags that are inflated by compressed air to lift objects- from smaller loads such as an automobile to larger ones such as airplanes- that can be deflated to be reused. A hose attaches from the exhaust to a big sack placed under the car. The air coming out of the pipe fills the bag, and the car lifts off the ground.

  1. Built-in safety lock mechanism that engages automatically at different heights, eliminating any need for additional stands or chocks to secure the vehicle.
  2. Air bag fast lube rolling pit jacks have a detachable remote-control pendant with two buttons- one to lift and one to lower- ensuring that you always have full control over the jack.
  3. The air bag variants have four full floating casters that allow for effortless rolling and maneuvering. The wheels are made of special roller bearings that reduce friction and wear, starting from as low as $4000, making it a small but profitable investment for your business.
  4. These rolling jacks have a pull handle that makes it easy to position the jack under the vehicle. The handle can also be extended for rear axles.
  5. The Jack has a high gloss powder coat paint that protects them from corrosion and rust, along with zinc plated components and accessories that resist oxidation and deterioration. The paint gives them a sleek and professional look while the zinc plating enhances their appearance as well as durability.
Categories
Fast Lube Hydraulic Jacks Jacks Pit Jacks

How Do Fast Lube Jacks Help in Streamlining Oil Change Operations?

Oil change operations are part and parcel of proper vehicle maintenance routines. Whether you are a DIY-guru, someone who’s an expert at fixing his own vehicle, or a professional automotive specialist, this essential task should take as little time as possible. And this is where fast lube jacks enter the picture.

A fast jack is designed to streamline oil change operations. This blog explains how that is done, but before that, we’ll take a brief look at these jacks and how they have shaken up the global auto maintenance sector.

What Exactly Are Fast Lube Jacks?

You already know what traditional jacks look like and how they function. Unlike these ancient machines which require considerable physical effort and are designed for manual operation, fast lube jacks are crafted to provide superior user experience. Perfect for quick and efficient lifting, the fast jacks use advanced hydraulic systems for elevating small passenger cars, coupes, and similar vehicles.

For heavier vehicles, a traditional jack is often a better option. But given the portability aspect of fast jacks, they are handy alternatives to bridge jacks. If you own and operate an automotive service station, fast lube jacks can save you a good deal of time besides helping you make anything around $24,000 or more every year only on tire rotation services.

How Do These Jacks Work?

No, we won’t go very deep inside the mechanics of these lifting systems since that would be totally unrelated to what we are discussing here. Rather, we’ll quickly go over what’s inside a jack & try to answer a question many clients ask: why use hydraulic jacks?

Inside fast lube jacks, you’ll find the following parts:

> Hydraulic Fluid: This is a dense & highly pressurized mineral fluid.

Piston and Cylinder: A piston is fitted inside a cylinder, and it moves within it. Once the hydraulic fluid rushes inside the cylinder upon pumping, it pushes up the piston. The result? The vehicle is lifted.

Pump Mechanism: This mechanism keeps the hydraulic fluid pressurized. A pump mechanism can either be manual, like a hand or a foot pump, or powered, which can be either electrically or pneumatically done.

The main reason most experts use hydraulic jacks is because of the superior lifting power provided without the extra physical effort that traditional jacks are known for.

Now you know why they are so popular! High-end and heavy-duty models like Stan Design Inc.’s Scorpion pit jacks are widely used across Canada and North America by professionally trained service personnel and people who love to tinker around with their vehicles.

Top 2 Advantages of Fast Lube Jacks

  1. Faster and more efficient: The first major plus point fast jacks possesses is the lightning-fast speed in their operations, besides making the entire process more efficient. Traditional jacks must be positioned in a certain manner before operating them. In a fast-moving workshop where oil changes and other (sometimes more complicated) jobs must flow smoothly and without interruptions, hydraulically powered fast lube jacks are necessary.
  2. Safer to use: One great advantage fast jacks have over other types is that they are very safe to work with. Keep in mind that an auto station has several pieces of heavy machinery working simultaneously. Fast lube jacks are designed with in-built safety features like overload valves and sturdy locking mechanisms to prevent accidents like sudden detachment of a vehicle while they are suspended at a height.

We have already touched upon how the hydraulic mechanism ensures complete peace of mind while the jack is in operation. Ease of use also comes with time savings and reduces physical fatigue substantially. Productivity levels in workshops often dip when traditional jacks are being used; that does not happen in these circumstances.

Streamlining Oil Change Operations

Now, we reach the meat of the matter. Fast lube jacks make the process faster and more efficient on several levels.

A. Faster (and Safer) Vehicle Lifting:

With the speed of a fast jack, lifting vehicles is easy and takes very little time. This is a major game-changer. When traditional jacks were the only options available, the first step – that of lifting the vehicle – was more cumbersome and needed precise placement paired with a high degree of physical effort.

Not anymore! Fast lube jacks allow you to begin oil change processes almost instantly, slashing time spent per vehicle.

B. Much-improved Workflow

Streamlined workflow is vital in a busy automotive shop. Fast jacks help achieve that since it makes faster vehicle lifting possible, leaving auto technicians to hop over from one task to another without wasting too much time per car. This lack of delay means your station can handle more vehicle volumes and almost zero deviation from a pre-defined timeframe.

To further refine the process, consider purchasing the Optimus a Pit Cover for vehicle lifting, recently launched by Stan Design, one of the leading jack manufacturers in North America. With a lifting capacity of 12,000 lbs., a powered platform, dual controls with built-in safety railing, besides being custom designed for your pit, the all-new product is on a par with the very best pit covers money can buy.

C. Technician Productivity Levels Peak

Not working with traditional jacks and using more modern kits like Scorpion pit jacks (another bestselling product from rom Stan Design Inc.) means that technicians are not physically fatigued. Naturally, productivity levels peak and your station witnesses a surge in revenue. Using better equipment also helps your technicians work on other tasks which would not have been possible otherwise.

The hidden benefit here is improved workplace safety. Reduced physical strain means technicians are more attentive and less fatigued, pacing their work throughout the day without any risk of injury.

D. Superior Resource Management Across the Board

Efficient use of resources is key to a successful business; there’s no reason automotive shops should be any different. With fast lube jacks and other pieces of modern equipment, savings can be made under various business aspects. Better utilization of the workforce means enhanced revenue potential. More vehicles being handled simultaneously means optimal utilization of available space, plus available time as well.

Fatigue-free and healthy technicians add up to huge savings on healthcare expenses; the latter are escalating every year.

Ultimately, downtime is largely minimized.

E. Enhanced Professional Appeal with Better Client Retention

How a service station looks and how professionally it operates are little details customers remember. If they’ve had a positive experience in the past, they will revisit your outlet. Fast lube jacks look more modern and a lot snappier than traditional jacks. Using them improves the overall aesthetics of your workspace.

It is widely known that a well-kept shop with efficient tools can impress customers and build a reputation for quality and speed.

And naturally, happy customers will keep coming back and might even recommend the business to others, driving business growth. Nothing can beat word-of-mouth publicity!

Conclusion

Before we conclude, let’s take a practical example to showcase how fast lube jacks streamline oil change operations and other services. Assume your automotive service center can handle 50 vehicles a day.

Using traditional jacks, each oil change will take up to 30 minutes, a big chunk of which is spent lifting and lowering the vehicle. Time is of the essence here, and you might not meet that 50 vehicle mark each day.