Stan Design

Tag: Truck Jack

Categories
Bridge Jacks Fast Lube Truck Jacks

Fast Lube Jacks vs. Rolling Bridge Jacks: Which is Right for Your Garage?

Truck jacks are specialized type of vehicle jacks that are used as heavy-duty lifting jacks, or in other words, to lift, suspend, lower, and service heavy duty military grade trucks, as opposed to regular cars. 

Vehicle jacks, like truck jacks, come in handy for more than the singular purpose of lifting. They can be used for seasonal tire rotation, changing a flat tire, making repairs, changing your oil, lube or other car fluids, inspecting for damage, etc. 

Fast Lube Jack- What is it? 

Fast lube jacks are specialized truck jacks that enable you to generate more revenue and profit for your business of core automotive workshop and garage services. How? Allow us to explain. 

According to industry statistics, you can make at least $24,000 per year by offering tire rotation to your customers. These are auxiliary tasks that can be conveniently carried out in commercial garages. 

If you have a service garage setup or own an auto repair shop, you can quickly set up a fast lube equipment fix and add vehicle lubrication service to the list of services you offer. This essential yet relatively rare to find service is sure to boost your clientele. 

By purchasing high quality fine grade jacks available in the market, starting from as low as $4000, you can make a small yet considerably profitable investment for your business. 

Rolling Bridge Jack– What is it? 

Rolling bridge jacks, alternatively referred to as bridge jacks or rolling jack lifts, are used for lifting purposes in an established lift system within a service pit area. They can be used in conjunction with other types of jacks or the same ones. 

Bridge jacks are the only way a 4-post service lift system can be converted into a fully functioning full-service vehicle lift system. They are often less mechanized and induce less labour in the lifting process. 

Each rolling bridge jack can be engaged to lift one full frame or two tires of your car off the ground, meaning two bridge jacks can lift the entire car for full wheel service. With convenient pull handles, that can also be extended for rear axles, rolling bridge jacks are easy to position under the vehicle. 

Comparing Fast Lube Jacks vs. Rolling Bridge Jacks 

To understand whether a fast lube jacks or rolling bridge jack is right for your garage, you must dive deep into understanding your own requirements. 

Whether you own a commercial garage or automotive workshop that caters to a niche clientele or are simply interested in purchasing one for your personal needs should be taken into consideration before making a purchase. 

For instance, both fast lube jacks as well as rolling bridge jacks are excellent suitors for commercial garages. However, if you want a jack that can come as first aid for emergency situations like getting a quick oil fix, fast lube jacks should be your companion on road. 

To understand this better and help you make an accurate purchase decision, let us tabulate the 3 key uses and features of both the jacks. 

Features Uses Rolling Bridge Jack Fast Lube Jack 
Operating System The operating system of both these jacks allows for powerful, easy and quick lifting. Rolling bridge jacks operate using powerful hydraulic, mechanical, electrical, hybrid or air bag/ motor systems. Fast lube jacks operate using powerful hydraulic, mechanical, electrical, hybrid or air bag/ motor systems. 
Safety Whether jacks have advanced safety features like automatic or height-based locking mechanisms will ensure their reliability while lifting. Rolling bridge jacks by Stan Design Inc., called StanJacks, have a built-in safety lock mechanism that engages automatically at different heights, eliminating the need for additional stands or chocks. Fast lube jacks by Stan Design Inc. have a built-in safety lock mechanism that engages automatically at different heights, eliminating the need for additional stands or chocks. 
Controls Whether jacks are manually or technologically controlled plays a key role in safety and convenience. StanJacks bridge jacks by Stan Design Inc. have a detachable remote-control pendant with two buttons- one to lift and one to lower- giving you full control over the jack at all times. Fast lube jacks by Stan Design Inc. have a detachable remote-control pendant with two buttons- one to lift and one to lower- giving you full control over the jack at all times. 

Stan Design Inc. 

Stan Design Inc. has been in the field of automotive jacks for over 25 years, which empowered them to research, design, develop and manufacture jacks with unparalleled safety features at highly cost-effective price points. 

Using the most advanced technology, by adhering to the strictest safety and quality standards in the industry, their fast lube jacks not only look aesthetically stunning, last longer, or perform better, but are also tested and certified by reputable organizations such as CSA Group, UL, CE, ISO, etc. 

Stan Design Inc.’s StanJack rolling bridge jacks and Scorpion fast lube jack products are used for a wide range of customizable automotive needs like proper oil change procedures and specialized oil handling solutions to reliable, easy and efficient lifting in seconds. 

Along with these features, their state-of-the-art machines and a crew of highly skilled and experienced engineers and mechanics and policies like warranties and after-sales support make them the most trusted jack manufacturers in Canada and North America. 

Fast Lube Jack Models by Stan Design Inc. 

Pit Jacks J7500HFL  

  • Capacity – 75,000 lbs.  

  • Narrow 34.5” Top Beam  

  • Heavy Duty Hydraulics  

 

Pit Jacks J7000LFL  

  • Capacity – 7,000 lbs.  

  • Narrow 34.5” Top Beam  

  • Heavy Duty Hydraulics  

 

Pit Jacks J9000HFL  

  • Capacity -9,000 lbs.  

  • Narrow 34.5” Top Beam  

  • Heavy Duty Hydraulics  

Tire Service Lifts LM9000P  

  • Capacity -9,000 lbs.  

  • Extended Lift height – 33”  

  • Dual hydraulic cylinders with full equalization  

  • Podium Style Control Panel  

  • Multi-position lock with air release  

  • Operate with a single button 

Rolling Bridge Jack Models by Stan Design Inc. 

StanJack J6000H  

  • Capacity – 6,000 lbs.  

  • Heavy-Duty Hydraulics  

  • Extended Lifting Height – Over 11”  

 

StanJack J7000L  

  • Capacity – 7,000 lbs.  

  • Heavy-Duty Air Bag  

  • Extended Lifting Height – Over 10.25”  

  • Lowest Collapsed Height – Only 7”  

 

StanJack J7500H  

  • Capacity – 7,500 lbs.  

  • Heavy-Duty Hydraulics  

  • Extended Lifting Height – Over 10.25”  

  • Lowest Collapsed Height – Only 7”  

 

StanJack J9000H  

  • Capacity – 9,000 lbs.  

  • Heavy-Duty Hydraulics  

  • Extended Lifting Height – Over 11”  

 

StanJack J12000H  

  • Capacity – 12,000 lbs.  

  • Heavy-Duty Hydraulics  

 

StanJack J15000H  

  • Capacity – 15,000 lbs.  

  • Heavy-Duty Hydraulics  

  • Extended Lifting Height – Over 11”  

StanJack J18000H  

  • Capacity – 18,000 lbs.  

  • Heavy-Duty Hydraulics  

StanJack J25000H  

  • Capacity – 25,000 lbs.  

  • Heavy-Duty Hydraulics  

StanJack J35000H  

  • Capacity – 35,000 lbs.  

  • Heavy-Duty Hydraulics  

StanJack J50000H  

  • Capacity – 50,000 lbs.  

  • Heavy-Duty Hydraulics 

get in touch!

Categories
Floor jacks Hydraulic Jacks Jacks

The Ultimate Guide to Choosing the Best Floor Jack for Lifted Trucks 

What are Floor Jacks? 

Floor jacks are handy tools that are useful in servicing your vehicle. From lifting the rear or front ends of your vehicle, to suspending them at a certain angle or length, to lowering them safely, effective floor jacks take care of it all. 

Floor jacks come in all shapes and sizes, and most importantly, in all categories of servicing. Namely, semi-truck floor jack, heavy duty pit jacks, military grade floor jacks, small car pit jacks, rolling bridge jacks, etc. 

You must purchase a floor jack based on your particular requirements to get the most out of it. In this blog, we will discuss how to understand your floor jacking needs, the process to choose the right floor jack, where to buy one, and finally our top picks. Read on. 

Understanding your Floor Jack Requirements 

Understanding your floor jack requirements before making a purchase is the key to getting the highest return on your investment. For this reason, we have collated a list of points which can break down the process in 3 tangible terms for you to gloss over. 

  1. Vehicle size – The first and foremost step in understanding your floor jack requirements is to assess your vehicle size. It is a fairly straightforward step, but imperative not to be missed. If you have a small car, like a family car or small van, you may or may not purchase heavy floor jacks made of sturdy materials, but if you own heavy duty military grade trucks, you should service them in commercial garages which host the right equipment, or at least use heavy duty pit jacks. 
  2. Undercarriage profile – The next step is to buy a floor jack that fits the distance between your vehicle’s chassis and the floor, also called ground clearance. 
  3. Storage Infrastructure – Finally, and perhaps the most enduring deciding factor in buying a floor jack is being mindful of its storage facilities. If you have a home garage, you must keep it clean and dry for storing your purchase, as the floor jack’s maintenance directly affects its longevity. 

Guide to Choose the Right Floor Jack 

Choosing the right floor jack based on your requirements is not rocket science. To choose the right floor jack for your needs, you must equip yourself with our 5-point basic toolkit, and you shall be all set to go. 

What is the toolkit, you ask? Well, researching the top 5 features that are a must in the best floor jack to lift the trucks. Here are the 5 features. 

  1. Load Capacity – The load capacity of a jack is directly proportional to the load lifting faculty of its build materail. And it represents the amount of weight it is built to lift- meaning in simple terms, whether it can lift small cars or heavy duty military grade trucks. A floor jack with a higher load capacity will safely carry loads without excessive manual exhaustion. It is generally measured in pounds or kilograms. 
  2. Build Material – As discussed in the point above, the material with which a floor jack is built is an important factor in determining its performance and longevity. Whether it is built to withstand heavy duress and long-term wear and tear, along with natural depreciation like rust and oxidation processes, can be assessed by this factor. High quality fine grade steel products are sturdier than plastic or rubber floor jacks. 
  3. Size and Portability – Often overlooked in the purchasing process, the size and portability of a floor jack has a considerable effect on its regular use. Larger sized floor or pit jacks that are used along with lifting systems fixed in commercial garages would obviously not be the right purchase choice for customers looking for portable options that can be safely tucked away in car storage compartments for quick access in emergencies. 
  4. Convenience and safety – Features in modern floor jacks should go beyond ensuring safety in its functioning and the personnel involved in operating it. They must include features that make it convenient for use- for instance, buttons for lifting and lowering, axles, stands or chocks for securing, and so on. However, safety features must not be overlooked and checking its locking mechanisms, etc. are a must. 
  5. Designed to Fit – Lastly, the ultimate guiding factor in choosing the best floor jack for lifted trucks is to see whether its design is functional. This means understanding, say for instance, that the fine polish on the floor jack body does not only showcase a sleek appearance, but also usefulness like protection against corrosion. Functional designs are the need of the hour, that would not only be useful in appraising the longevity of your floor jack but also whether the price it is listed at is worth paying. 

Where to Buy Floor Jacks? 

There are many great options available online for purchasing the best floor jack to lift a truck. However, there are only a handful of businesses that fit both your needs and your budget. 

And even lesser, that manufacture jacks that fit your pits too. Stan Design Inc. is one of them. With over two decades of experience within the industry, Stan Design Inc. has craftily mastered the art and craft of designing and manufacturing technologically advanced jacks that are pocket friendly. 

Their line of Scorpion floor jacks come in both hydraulic and air bag variants, with a wide load capacity that can accommodate a large range of vehicles. That is why their products are our top picks, which we will discuss in the last section. 

Stan Design Inc. Scorpion Floor Jack Models 

Scorpion TJ12S 

  • Capacity- 24,000 lbs./ 12 Tons 
  • Lifts Over 15.75”

Scorpion TJ12SL 

  • Capacity- 24,000 lbs./ 12 Tons 
  • Only 7.5’’ Collapsed
  • Height  Lifts Over 15”  

Scorpion TJ14

  • Capacity- 28,000 lbs./ 14 Tons 
  • Only 8.25” Collapsed Height 
  • Lifts Over 20”  

Scorpion TJ12E 

  • Capacity- 24,000 lbs./ 12 Tons 
  • Only 8’’ Collapsed Height 
  • Lifts Over 15.75” 
  • 2 Extendable Arms  

Scorpion MJ25 

  • Capacity- 25,000 lbs./ 12.5 Tons 
  • Lifts Over 36” 
  • Extendable Beam with Stackable Adapters Designed for All Military Vehicle Applications.

get in touch!

Categories
Pit Jacks

Maximizing Efficiency in Fast Lube Shops with Rolling Pit Jacks

Vehicle jacks like heavy-duty military-grade jacks or hydraulic pit jacks like fast lube rolling pit jacks, all serve one purpose. Lifting, suspending, and lowering heavy weight vehicles and cars securely, while maintaining the safety of the personnel involved. 

These tools are applicable to various usages and boast functional features that we will now discover. 

Fast Lube Pit Jacks– Uses and Advantages 

1. Tire Rotation- Rolling pit jacks or fast lube rolling pit jacks are used to rotate tires in commercial garages, automotive shops, and in the convenience of homes. Tire rotation allows tires to be rotated so that wear and tear occurs evenly and does not affect the long-term performance of the car, while enhancing its longevity. 

2. Lube Service- Fast lube rolling pit jacks are, as the name suggests, primarily involved in the lubrication process of vehicles. It is a vehicle maintenance service that involves checking and replacing lubricants used on the chassis, oils within the lubrication system, and inspections and tests to ensure the correct functioning of automatic lubrication systems. 

3. Fluid Changes- Following from the point above, fast lube rolling pit jacks are excellent companions for personnel and individuals looking for changing or cleaning car lubrication system fluids. These include oil and filter change, tire pressure & condition check, check of under bonnet fluids (cooling system, brakes, clutch where applicable), hoses, lights and a general good look under the vehicle (CV joints, brake hoses, exhaust and suspension, etc.). 

4. Lift System Operations- Rolling pit jacks are often required to work in conjunction with one or more than one jack of its kind, on a lift system. Also called 4 post lifts, these systems are mechanical lifting systems that rely on 4 posts to lift a piece of equipment or vehicle to a specified height for work. They are a common sight in commercial garages and automotive shops where heavy-duty or military-grade vehicle owners are the typical clientele. 

How Rolling Pit Jacks Enhance Lube Shop Efficiency? 

By offering tire rotation and tire service to your customers, you can generate more revenue and profit for your business. According to industry statistics, you can make at least $24,000 per year by offering tire rotation to your customers. That’s a lot of money for a small investment. 

Rolling pit jacks or fast lube garage jacks are the type of jacks that make tire rotation, lube and tire service possible. How? They are made of high-quality materials and components, and often boast innovative features that make them easy to use and safe to operate by fitting your pit and choices. 

Because of the ease and convenience fast lube pit jacks offer, the personnel can use them in a time-efficient manner, optimizing the overall time cost of the garage and increasing maximizing its efficiency. These jacks are also very safe to use, decreasing the possibility of harm inflicted on the personnel handling them. 

The cost-effective component of using fast lube rolling pit jacks also adds to its allure, especially for commercial usage and clients. However, it has long-term dividends for its individual users too. If maintained correctly and stored carefully, these jacks can be used for a long time with little or no improvement costs. 

Product Recommendations 

Stan Design Inc. Pit Jacks J6000HFL 

  • Capacity- 6,000 lbs. 

  • Narrow 34.5” Top Beam 

  • Heavy Duty Hydraulics 

  • Extended Lifting Height 

  • Lowest Collapsed Height 

Stan Design Inc. Pit Jacks J7500HFL 

  • Capacity- 75,000 lbs. 

  • Narrow 34.5” Top Beam 

  • Heavy Duty Hydraulics 

  • Extended Lifting Height 

  • Lowest Collapsed Height 

Stan Design Inc. Pit Jacks J7000LFL 

  • Capacity- 7,000 lbs. 

  • Narrow 34.5” Top Beam 

  • Heavy Duty Hydraulics 

  • Extended Lifting Height 

  • Lowest Collapsed Height 

Stan Design Inc. Pit Jacks J9000HFL 

  • Capacity- 9,000 lbs. 

  • Narrow 34.5” Top Beam 

  • Heavy Duty Hydraulics 

  • Extended Lifting Height 

  • Lowest Collapsed Height 

Stan Design Inc. 

Stan Design Inc. has been in the field of automotive jacks for over 25 years, which empowered them to research, design, develop and manufacture the Scorpion fast lube equipment with unparalleled safety features in Scorpion products used for proper oil change procedures and specialized oil handling solutions. 

Using the most advanced technology, by adhering to the strictest safety and quality standards in the industry, their fast lube jacks not only look aesthetically stunning, last longer, or perform better, but are also tested and certified by reputable organizations such as CSA Group, UL, CE, ISO, etc. 

Along with these features, their state-of-the-art machines and a crew of highly skilled and experienced engineers and mechanics and policies like warranties and after-sales support make them the most trusted jack manufacturers in Canada and North America. 

Stan Design Inc. Fast Lube Rolling Pit Jack Features 

  1. Safety- Safety features in Stan Design Inc. fast lube pit jacks include an in-built 3-stage locking mechanism system that engages automatically at different heights, excluding the requirement of any extra stands or chocks to secure the vehicle. 

  1. Operability- The Stan Design Inc. fast lube pit jack comes in 2 variants- powered by dual hydraulic cylinders or powerful inflatable air bags- to lift your heavy vehicle in seconds without the need for rigorous mechanical hand pumping. 

  1. Convenience- The Stan Design Inc. fast lube pit jack lifts your vehicle with the touch of a button, well two- one to lift and one to lower- attached to a detachable remote-control pendant, and an extendable pull handle that makes it simple to position the jack under the vehicle. 

  1. Maneuverability- All the Stan Design Inc. fast lube pit jacks have four full floating casters or wheels, made of special roller bearings that reduce friction and wear, allowing for easy rolling and maneuvering. 

  1. Durability- The Stan Design Inc. fast lube pit jack is made of high-grade fine steel material and coated with a high gloss powder paint, along with zinc plated components and accessories that resist oxidation, deterioration, corrosion and rust, while enhancing their durability. 

  1. Cost-effective- The Stan Design Inc. fast lube pit jacks start from as low as $4000 and allow you to offer lube and tire service to your customers, generating at least $24,000 per year. 

get in touch!

Categories
Uncategorized

Best Jack Brand in 2024- 5 Points to Compare and Choose

The best vehicle jack brands are those that do not only provide you with high quality truck or vehicle jacks, but also exceptional customer service. 

They do not make promises of cheap prices as they acknowledge that cheap price tags come along with cheap products, yet they make cost-effective solutions. 

Nowadays, and this does not just apply to jack brands alone but to all modern-day brands, the verity of a brand can be identified through its testimonials. 

Along with these, there are many other criteria to judge and conclude any jack brand’s comparison effectiveness. Let us learn about the top 5 of those. 

5 Jack Brand Comparison Criteria 

  1. Experience- Perhaps the most important factor in determining the best jack brand among numerous others is the amount of time they have spent learning from and contributing to the industry.  It is no secret that advancements in technology have changed the business landscape rapidly. Hence, whether a jack brand is the best in the market can be easily tested by looking at how they too have advanced in their product offerings- whether they have moved past traditional mechanical vehicle jacks to adopt newer offerings like effortless hydraulic systems, etc. 
  1. Product Features- Continuing from the above point, checking out the jack features of the brand you select to choose from is essential before making a purchase. Modern features in jacks like one-touch button-operated lift systems, low-profile height adjustability and portability, floating casters and rolling bearings, etc. are an indelible mark of technological adoption and advancement. Whether a jack brand offers these product features along with others that are tailored to fit your specific needs and address your concerns must be deliberated upon.  
  1. Product Range- Next, after checking the variety of experience along with a jack brand’s amount of experience in the industry, as well as the variety of product features it offers, examining the variety or range of its products itself is imperative. The best jack brands should be offering more than one type of jack- being quite literally the jack of all trades (if not master of none). So, for instance, if you are on a brand’s page because you are looking for floor jacks, you must be able to check out their range of screw jacks, pit jacks, rolling bridge jacks, etc. This will allow you to gauge their overall capability based on what people are saying about all their products. 
  1. Client Testimonials- Following from the preceding point, client testimonials go a long way in speaking for a brand’s goodwill. Review the testimonials carefully to see exactly what people are talking about. This will give you an exact idea of the brand’s offerings, be it their product features or their overall efforts to serve their customers. It will also tell you if they might not meet your expectations and if you are better off checking out other sellers. 
  1. Price Point- Finally, the price point of a brand determines its target audience, and therefore, a lot of its quality checking and analysis processes in the design, manufacturing, and service offerings. These end-to-end operations, in turn, determine their price point, giving the relationship between the two objective entities a causal character. Ultimately, the price of the jacks in today’s digital brand and business era ends up symbolizing a lot more than just cost price for the buyer. They represent tailored experiences that the buyer, aka you, would be purchasing. 

How to Research Best Jack Brands in the Market? 

When you Google (or Bing, if you may) “Top jack brands” or “Best jack brands” or “Best vehicle jack brand” or “Best truck jack brands”, chances are the top results would appear based on their SEO (or search engine marketing efforts) rather than the actual quality of the brands. 

And let us be real- modern research method is hardly offline, like most other things. With this major online shortcoming as well as its impersonal manner, it becomes difficult to know the efficacy of the product you are looking for unless you try it yourself (which ends up costing you dearly). 

But do not worry. All is not lost. You can run a quick comparative analysis of all the top search results and conclude in no time! To get you started, we cover our top pick- Stan Design Inc. 

Stan Design Inc.- The Best Jack Brand in Canada 

Stan Design Inc., the best truck jack brand in Canada and North America, comes with over 25 years of experience in the vehicle jack industry. They work in both designing and manufacturing high-quality engineered jack products for the target markets. 

At extremely cost effective and efficient price points, they offer a range of vehicle jacks including Scorpion line of floor jacks and pit jacks, and StanJack line of rolling bridge jacks and fast lube jacks, that have lifting capacities to lift even military vehicles. 

This auto jack manufacturer delivers premium jacks designed with cutting–edge technology that are safe, reliable and stand the test of time. Their variety and range enable them to offer portable as well as fixed pit solutions. 

How do you know that Stan Design Inc. is the best vehicle jack brand in the market? If the proof of work and customer testimonials are not enough, here is how they add even more value to you by offering mastermind business solutions. 

Their fast lube jacks, for instance, allow you to offer tire rotation services, along with fast lube solutions like oil and lubricants change. According to industry statistics, you can make at least $24,000 per year by offering tire rotation to your customers. 

Conclusion 

To sum it all up, there are a few factors that you should bear in mind while deciding on a jack brand. 

Among them the top 5 are the brand’s experience in the industry in terms of both quantity and variety, product features and range, client testimonials and price point. 

When you compare jack brands in the market, along with these objective factors, which can be an effective starting point, you should consider your own specific requirements. 

Finally, remember, a jack is only as good as its condition. A jack’s longevity ultimately depends on how you use to store and maintain i

 

get in touch!

Categories
Jacks

Calculating Jack Load Capacity Requirements

Calculating Jack Load Capacity Requirements
Calculating Jack Load Capacity Requirements

Importance of Load Capacity in Jack Selection

The load capacity of different jack types is determined by the amount of weight it is designed to carry. Based on the mode of operation of a jack type, whether mechanical or hydraulic, its load capacity may vary widely. 

Usually measured in pounds or kilograms, a typical jack type has a load capacity ranging from 2,000 to 5,000 pounds (about 2267.96 kg), with heavy-duty jack models handling up to 10,000 pounds (about 4535.92 kg) of weight. 

The importance of load capacity in selecting a jack type is great because it directly affects the health of the lifting, suspending and lowering process, as well as the safety of the personnel and the vehicle involved. 

In other words, if a smaller jack is employed to lift heavy trucks beyond the load capacity of the jack, for instance a generic floor jack or scissor jack, then it is bound to fumble the process and damage your vehicle and may inflict indirect but severe bodily harm to the people nearby. 

On the other hand, even using a heavy-duty jack for lifting small cars is not recommended. Even though it might sound like a harmless idea, in our experience such cases reduce the speed of lifting when smaller weights are involved. 

Since the jacks have heavier infrastructure for lifting small cars, knee-jerk reactions within the machinery allow sustained injuries on the car being lifted. 

Jack Types and Load Capacities

The above discussion paves the way for comparing the most common jack types and their different load capacities. 

  1. Floor Jack – These are the most popular jack types used in lifting heavy weights, be it small cars or heavy-duty military-grade trucks. Their load capacities vary according to the type of car they are used to lift. For instance, the Scorpion floor jacks by Stan Design Inc. are built to lift anywhere from 24000 lbs.- 28000 lbs. 
  2. Fast Lube Jack – These are manually operated machines that aid in tire servicing like tire rotation, lube servicing etc., transforming your commercial garage into a proper automobile station. For instance, the fast lube jacks by Stan Design Inc. are built to lift anywhere from 6000 lbs.- 9000 lbs. 
  3. Rolling Bridge Jack – These jacks allow a special type of lifting, by aiding automobile lift systems found in big garages. These are very costly and are prone to malfunction. For instance, the rolling bridge jacks by Stan Design Inc. are built to lift anywhere from 6000 lbs.- 50000 lbs. 
  4. Pit Jack – These tools are jacks specially designed for fitting into service pits of commercial garages or automotive shops. For instance, the pit jacks by Stan Design Inc. are built to lift anywhere from 12000 lbs.- 35000 lbs. Not only that, but they are also built with powerful air motors for lifting in a few seconds. 

Calculating Load Requirements

Calculating Load Requirements 

Calculating the load capacity for jack types involves understanding the mechanics of the jack and the weight it needs to support. This is the part where it gets technical. 

Here is a basic formula to calculate the force required for a jack without considering friction:

F=2πRQp

Where:

  • ( F ) is the effort force at the end of the arm or handle (in lb or N) 
  • ( Q ) is the weight or load (in lb or N) 
  • ( p ) is the pitch – distance or lead of thread in one turn (in inches or m) 
  • ( R ) is the lever-arm radius (in inches or m) 

We will not bore you further with information that you need not confuse yourself with. This should be taken into account by manufacturers before they design jack variants for specialized processes. 

In fact, this is an important step in distinguishing whether your provider understands your requirements and can furnish you with the right tool or not.

Factors Affecting Load Capacity

There are several common factors that affect the load capacity of all jack types. Below we will discuss 3 of these which are comprehensive enough to be applicable universally. 

  1. Mode of Operation – Whether the jack operates on a mechanical, electrical, hydraulic, air motor powered, hybrid, or any other mode greatly affects its load capacity. This happens because some jacks require mechanical hand pumping to lift a particular load while other modern and more efficient lifting systems like hydraulic jacks can lift loads easily within a few seconds with the push of a button or two.  
  2. Environmental Factors – Where the jack is placed- that is, its immediate physical environment- before and after its use is extremely important in determining not only its load capacity but also its longevity. A dirty and damp environment will often cause oxidation and lead to corrosion of parts, rendering the tool unsafe to use or worse, virtually ineffective. 
  3. Build Material – This determines the load capacity of each jack type, along with other physical attributes like its size and portability. Whether a jack is made of high-grade steel with fine iron bearings or regular plastic material determines how much load it can lift. Also, a bigger jack can lift heavier loads and vice versa. 

Stan Design Inc. Jack Types with Different Load Capacities 

Stan Design Inc. is the most reputable and trusted name in the truck jacking industry in Canada and North America. 

With over 25+ years of experience in the field of designing and manufacturing jacks like floor jacks, pit jacks, rolling bridge jacks, fast lube jacks, etc., they are the masters of understanding your requirements- whether for personal or commercial use- and helping you accordingly. 

You can browse the second section of this blog itself to arm yourself with crucial information about the load capacities of their different jack types. 

Not only do they provide jack types with a wide range of load capacity, but they also manufacture jacks in both air bags and hydraulic design variants. 

This empowers you to load and lift your vehicles effortlessly and safely without feeling a hole burning through your pockets! 

 

get in touch!

Categories
Fast Lube

Fast Lube Specialized Oil Handling Solutions for Garages in 2024

What are the benefits of a fast lube system?

In order to understand that we need to clarify what we mean by a fast lube. And no, it is not what you think. The context is automotive workshops and commercial garages. 

A fast lube service is fundamentally a specialized oil handling solution offered by commercial garages and automotive workshops to keep your vehicle’s lubrication system operative.

However, faulty or unsupervised fast lube systems can disrupt your vehicle’s performance. In fact, if technicians attempted to perform a quick oil change without using a proper fast lube system, they may accidentally injure themselves. 

At commercial garages, proper oil change procedures and specialized oil handling solutions are a less-than-common sight. And the ones that exist are less than effective. Below we will cover some of the main risks related to this. 

Risks Associated with Oil Changes:

  1. Oil Leak – The most common risk associated with oil changes in fast lube systems is the risk of oil leakage going undiagnosed and thus un-prevented. This can not only dirty the floor but also make the environment unhygienic and accident prone. Personnel involved in it may trip and fall, causing harm to themselves as well as heavy and expensive machinery usually kept in close proximity. 
  2. Lubricant Contamination – This can arise from both internal and external factors, accelerating the wear and tear rate dramatically, because abrasive wear can cause a chain reaction in lubricated machinery. 
  3. Dirty Oil Filter – This can be avoided by implementing preventative measures, but during a fast lube service, this can go unnoticed if the right fast lube equipment is not used. Which can further lead to increased engine wear, reduced lubrication, reduced engine performance, sludge formation, clogged oil passages, and a range of other problems. 
  4. Personnel Accidents – In a busy automotive repair shop, a technician attempted to perform a quick oil change without using a proper fast lube system. Due to the haste, the technician accidentally spilled hot oil on themselves, resulting in burns and injuries. This is not an uncommon story and can happen to you too. 

Scorpion Fast Lube Equipment:

The Scorpion Fast Lube Jacks allows you to offer tire rotation and tire service to your customers, and generate more revenue and profit for your business of core automotive workshop and garage services. 

These are designed to fit your pit and your budget. They are made of high-quality materials and components, and they have innovative features that make them easy to use and safe to operate. 

According to industry statistics, you can make at least $24,000 per year by offering tire rotation to your customers. That’s a lot of money for a small investment, like the North American Made Truck Jacks

Basically, specialized equipment like fast lube systems safely and efficiently handle oil changes, reducing the risk of accidents and injuries caused by manual handling of hot fluids. Scorpion Fast Lube equipment is an important addition to the cause. 

Specializing in the field of fast lube jacks – that operate using both hydraulic and air bag systems – Stan Design Inc. offer fast lube jacks, among other types like floor, pit and rolling jacks, of varying lifting capacity to cover your fast lube needs. 

Stan Design Inc. Scorpion Fast Lube Jack Features:

  1. Safety – Safety features in Scorpion products include an in-built 3-stage locking mechanism system that engages automatically at different heights, excluding the requirement of any extra stands or chocks to secure the vehicle. 
  2. Hydraulics or Air Bag Models – Scorpion Fast Lube Jack comes in 2 variants – powered by dual hydraulic cylinders or powerful inflatable air bags- to lift heavy vehicle in seconds without the need for rigorous mechanical hand pumping. 
  3. Convenience – The Stan Design Inc. Scorpion Fast Lube Jack lifts your vehicle with the touch of a button, well two – one to lift and one to lower – attached to a detachable remote control pendant, and an extendable pull handle that makes it simple to position the jack under the vehicle. 
  4. Maneuverability – All the Stan Design Inc. Scorpion Fast Lube Jacks have four full floating casters or wheels, made of special roller bearings that reduce friction and wear, allowing for easy rolling and maneuvering. 
  5. Durability – The Stan Design Inc. Scorpion Fast Lube Jack is made of high-grade fine steel material and coated with a high gloss powder paint, along with zinc plated components and accessories that resist oxidation, deterioration, corrosion and rust, while enhancing their durability. 

Stan Design’ Scorpion Fast Lube Jacks to Choose From:

Stan Design Inc. has been in the field of automotive jacks for over 25 years, which empowered them to research, design, develop and manufacture the Scorpion fast lube equipment with unparalleled safety features in Scorpion products used for proper oil change procedures and specialized oil handling solutions. 

Using the most advanced technology, by adhering to the strictest safety and quality standards in the industry, their fast lube jacks not only look aesthetically stunning, last longer, or perform better, but are also tested and certified by reputable organizations such as CSA Group, UL, CE, ISO, etc. 

Along with these features, their state-of-the-art machines and a crew of highly skilled and experienced engineers and mechanics and policies like warranties and after-sales support make them the most trusted jack manufacturers in Canada and North America.

Pit Jacks J6000HFL –

  • Capacity – 6,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 
  • Extended Lifting Height 
  • Lowest Collapsed Height 

Pit Jacks J7500HFL –

  • Capacity – 75,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 
  • Extended Lifting Height 
  • Lowest Collapsed Height 

Pit Jacks J9000HFL –

  • Capacity –9,000 lbs. 
  • Narrow 34.5” Top Beam 
  • Heavy Duty Hydraulics 
  • Extended Lifting Height 
  • Lowest Collapsed Height 

get in touch!

Categories
Bridge Jacks Floor jacks Hydraulic Jacks Jacks Truck Jacks

How to Choose the Right Truck Jack for Efficient Lifting?

Choosing the Right Truck Jack
Explore various truck jacks and their features to find the perfect match for your lifting requirements.

Working in commercial garages or automotive workshops can become a nightmare without the right collection of equipment at your disposal. One such tool in your arsenal is truck jacks. These heavy-duty jacks for trucks are capable enough to make the lifting process of big vehicles smooth and effortless while ensuring safety and stability.

By saving time in lifting heavy loads, suspending them securely to service them efficiently, and lowering them without technical hiccups, truck jacks enable workers to maintain and repair bigger vehicles like heavy-duty military or commercial trucks, buses, sports utility vehicles (SUVs) and all sorts of big automobiles.

Having many different operational mechanisms- mechanical, electrical, hydraulic, hybrid, etc., these jacks deliver high value to professionals wielding them. By lifting and transporting all types of heavy weights, industrial loads, vehicles, and machinery equipment for clamping, jacks aid customers in varying industries, like:

  • Aircraft
  • Automotive
  • Bridges
  • Cable tensioning
  • House moving
  • Construction
  • General industrial
  • Laboratory
  • Locomotive
  • Marine
  • Mobile home
  • Railroad
  • Shipbuilding
  • Shoring and stabilizing such as for tunnels and mines
  • Tractors & trailers

To understand simply the workings of a truck jack like the Stan Design pit jack, let us consider the example of a hydraulic system of operation, consisting of the following broad components:

  • Hydraulic oil,
  • Reservoir or buffer or oil tank,
  • Main cylinder or ram,
  • Release valve,
  • Control valve,
  • Check valve,
  • Lifting arm or pad,
  • Hydraulic pump with piston or plunger, and
  • Pump lever or handle.

The reservoir or buffer or oil tank is the physical compartment of the heavy-duty jack for trucks that holds the hydraulic liquid or pump oil together when it is not in use. The control valve stays in a closed position when the jack is not in use to prevent the accidental flow of oil.

When the handle or lever of the hydraulic pump with piston or plunger is mechanically lowered or raised, it activates force and builds up pressure in the adjoining compartment, i.e., the reservoir or buffer tank containing the hydraulic fluid or pump’s oil.

This applied pressure transfers the oil from the pump through a check valve and into the main cylinder or the ram, which extends out of the hydraulic jack body creating the required lifting force and lifting the load.


What are Factors to Consider for Choosing the Right Truck Jack for Efficient Lifting?


1. Compatibility with Your Vehicle: Before choosing the right jack for lifting heavy vehicles, it is essential to check its specifications to verify its compatibility with your vehicle. This step is important and must not be avoided under any circumstances or considerations because doing so can impose great harm on not only the vehicle being lifted and serviced using the jack, but to the safety and even life of the personnel engaged in the process of lifting and maintaining the vehicle. To ensure compatibility, checking the jack’s weight capacity, size, portability, clearance or lift range, quality, build materials, brand reputation and user testimonials can be a starting point.

2. Weight Capacity: Usually expressed in tonnage, the weight capacity of a jack shows its capability of clamping, lifting, suspending, lowering, transporting, etc. loads of particular weights. The load or weight capacity of a jack is distinctly different from its lift range or size and is not indicative of either. Neither do the jack’s lift range nor its size in any way denote its load capacity. So, if you have a bigger or heavier vehicle to be repaired, going for heavy-duty pit jacks would be a wise choice, while for smaller cars investing in small and more portable repair and maintenance jacks would be sufficient.

3. Size and Portability: The size of a jack directly affects its portability. Heavier jacks, usually made of steel, are more suited for use in commercial garages and automotive workshops where they may be fixed in places for more convenient use. Unlike that, smaller jacks using hydraulic systems to operate either made of lightweight steel or aluminum, can be stored in small storage compartments of cars to be unloaded and used for emergency purposes like fixing a flat tire, etc. However, it is wise to not rely on portability alone while determining the size of the jack being purchased and weigh its compatibility with your owned vehicle or the types of vehicles you commercially service.

4. Clearance: The clearance of a vehicle refers to the distance between the lowest part of its undercarriage (not including the tires) and the ground. Also referred to as ride height or ground clearance, this area is the best suited for car jacks to be implemented for repairs and maintenance. Usually, the higher the clearance, the higher the center of mass of the vehicle. Therefore, this can be translated to suit low lift ranges of car jacks to make it compatible with the clearance of the car being serviced.

5. Brand Reputation and User Testimonials: While making an automotive jack purchase, you should bear in mind its producer and manufacturer. Checking out the brand reputation diligently and doing a fair bit of research on its product description and features, while also reviewing user feedback and testimonials for both the product and producer can go a long way in ensuring that you make a wise investment. For example, our Stan Design pit jacks are highly trusted across the industry as we serve our customers not only before they make a purchase with us, but also long after they sale is closed.

6. Quality and Build Materials: Perhaps, the biggest component in selecting a jack is its safety features. Since it is such a basic consideration, we have not discussed it as a separate point and wish to highlight it through this concluding point about quality and build materials. The quality of a jack should never be compromised based on price points as it can severely constrain the safety of your vehicle and yourself. Checking its build materials, whether steel, aluminum, hybrid, etc. is imperative to determine not only its size and portability but also its quality and sustainability, that is directly proportional to the safety it offers.

get in touch!

Categories
Bridge Jacks Floor jacks Hydraulic Jacks Jacks Pit Jacks Truck Jacks

What Type of Jack Do I Need for a Truck?

Trucks need periodic maintenance and repair to run smoothly and carry freight across the continent. So, truckers have to rely on workshops to keep their vehicles up and running. Which tool do the workshops rely on the most to service trucks? It’s the truck jack.

The type of Truck jacks are by far the most popular and effective vehicle servicing tools in the world. They use hydraulics to lift heavy trucks with minimum effort from the user. Once elevated, the truck’s undercarriage becomes accessible to technicians, aiding in servicing essential components like the transmission, exhaust system, and wheels.

Truck jacks come in many different varieties and weight capacities. Let’s look at the most popular iterations so that you can choose the perfect equipment for your workshop or garage.

1. The Heavy-duty Floor Jack

Hands down, this is the most popular truck jack on the market. Incredibly easy to operate, fast, efficient, and safe, the heavy-duty floor jack serves as the backbone of the car and truck service industry worldwide.

The floor jack’s lifting mechanism comprises a set of hydraulic cylinders filled with a viscous fluid, pistons, a pumping handle, and a lifting apparatus. When the operator pumps the handle, the hydraulic fluid transfers and compounds the pressure on the piston of the lifting apparatus and makes short work of lifting heavy vehicles.

When buying a heavy duty floor jack for your garage or workshop, look for the following attributes:

  • Always buy a truck jack with a greater weight capacity than the heaviest truck you are planning to lift. This way the jack won’t buckle under the weight of the vehicle and compromise the safety of the user and the vehicle.
  • What’s your truck’s ground clearance like? Is it a lifted truck or a standard one? These are two important questions you need to ask yourself before homing in on the truck jack with the right lift height.
  • The best floor jacks for cars, trucks, EVs, and other vehicles are made of strong and durable materials like high-tensile steel. This makes them last really long and give a great return on the investment.

2. The Bottle Jack

Why are bottle jacks called ‘bottle’ jacks? Well, they are shaped like bottles! That’s it. No surprises there. These stubby jacks are robust and designed for heavy-duty lifting. And like the floor jacks, bottle jacks utilize the power of hydraulics to lift big and bulky vehicles high enough for undercarriage repair and maintenance.

If you own a full-sized pickup truck or a large commercial vehicle, a bottle jack might be the tool you need. Its compact design and smaller footprint compared to a floor jack make a bottle jack easier to move around and store.

The only catch is that bottle jacks aren’t known to lift as high as floor jacks and might not be the right tool to work on lifted trucks or off-road vehicles.

3. Scissor Jacks for Small Trucks and Cars

Scissor jacks are cool mechanical devices that convert rotational motion into upward thrust, lifting cars and small trucks in the process. You must have one as part of your car’s standard toolkit.

Scissor jacks come in handy in case of roadside repairs like tire changing and undercarriage inspection. A light yet sturdy build and incredibly small footprint make these cool tools perfect for lifting cars in tight spaces and uneven surfaces.  But lifting loaded trucks is an absolute No for scissor jacks because they are simply not built to carry the weight of large and bulky vehicles.

4. Pit Jacks

Pit jacks have been keeping trucking fleets on the road for ages now. It’s impossible to imagine a truck or bus servicing workshop without a pit jack, and there’s a good reason for that.

Vehicles like large trucks and armored cars must take a lot of beating on their undercarriage due to the kind of terrain they normally have to endure. Only a pit jack has the robustness and lifting power to elevate these vehicles high enough for major undercarriage repair.

The only caveat is that these super-efficient tools need to be installed in dedicated service pits for them to operate. Despite their lack of mobility, pit jacks are tough and durable. Modern pit jacks rely on a combination of hydraulics and compressed air pumps for heavy lifting. They also have stackable adapters to accommodate all types of vehicles and subframes. So yes, you can trust a pit jack to lift anything you throw at it.

5. Rolling Bridge Jacks

Rolling bridge jacks are hydraulic devices designed to operate in tandem with four-post lifts. A set of roller bearings makes it easy to maneuver a bridge jack in a service pit.

Operating one is easy too. You just need to place the lifting apparatus of the jack under your vehicle and activate the hydraulic system and voila! Your vehicle is lifted high enough for easy access to the undercarriage. All modern bridge jacks use a combination of hydraulics and pneumatic pressure (compressed air) to lift cars and trucks. An intuitive control system aided by a locking mechanism makes the operation safe and easy.

Now that you know what’s selling, consider the following tips to home in on the perfect truck jack for your workshop:

6. Mind Your Truck’s Weight and Size

Before selecting a jack, it’s crucial to know the maximum weight of the trucks you are going to service. Check the manufacturer’s specifications for the maximum weight capacity of the truck jack you are planning to buy. Using a jack with insufficient capacity is a recipe for disaster.

Safety First: Use Jack Stands

Regardless of the jack type, always prioritize safety. Once your truck is lifted, secure it with jack stands. This provides an extra layer of protection, preventing accidents in case the jack fails.

Endnote:

Choosing a truck jack is a decision that can seriously impact your maintenance routine. Whether you opt for a scissor jack, heavy-duty floor jack, or a full-blown rolling bridge jack, make sure it aligns with your truck’s specifications. Remember, investing in the right tools ensures the longevity of your workshop business.

get in touch!

Categories
Hydraulic Jacks Jacks Pit Jacks Truck Jacks

Why Use Heavy-Duty Floor Jacks to Safely Lift Heavy Trucks?

The All Essential Automotive Tools

A heavy-duty floor jack is a must-have tool for any workshop owner or DIY car enthusiast. Maintenance and repairing activities like changing a tire, fixing the wheel assembly, or lubrication – basically anything that has to do with the undercarriage of a vehicle – require it to be lifted high enough for technicians to reach the undercarriage safely. Hence, you need heavy-duty floor jacks to lift heavy trucks, semis, cars, and every other type of vehicle effortlessly and safely.

If you are new to using truck jacks or floor jacks, this blog will help you understand the basics of lifting a heavy vehicle safely for repairs. Read on!

Tools and Accessories You’ll Need

Before you start, keep the following tools and accessories handy:

  1. Heavy-duty floor jack: Ensure it has the capacity to lift your truck’s weight.
  2. Jack stands: These provide critical support once the truck is lifted.
  3. Wheel chocks: To prevent the truck from rolling while lifted.
  4. Lug wrench: To loosen the lug nuts if you’re working on the wheels.
  5. Safety gloves and goggles: For personal protection.

Step-by-Step Guide

  • Choose the Right Location: Park your truck on a level surface and engage the parking brake.
    Make sure the area is well-lit and free from any obstacles.
  • Prepare the Vehicle: If you’re lifting the truck to work on the wheels, use the lug wrench to slightly loosen the lug nuts on the wheels you plan to remove. Remember, do not remove them completely. This will make it easier to remove the wheel later.
  • Place Wheel Chocks: Position wheel chocks against the wheels touching the ground. This will prevent the truck from rolling while it’s lifted.
  • Locate Jacking Points: Consult your truck’s owner’s manual to find the recommended jacking points. These are usually located on the undersurface of the vehicle, near the wheels. They are reinforced sections of the frame designed for lifting. Remember, using a heavy-duty floor jack on any other section of the vehicle for lifting can cause serious damage to the chassis, leading to unnecessary expenses.
  • Position the Heavy-Duty Floor Jack: Place your truck jack or heavy-duty floor jack under the selected jacking point. Ensure the jack’s saddle is correctly aligned with the jacking point to prevent chassis damage.
  • Pump the Jack: Slowly pump the handle of the floor jack until the truck starts to lift. Keep an eye on the vehicle as it rises and stop when you’ve reached the desired height. Be cautious not to exceed the jack’s weight capacity.
  • Insert Jack Stands: Once the truck is raised, immediately position jack stands under the recommended jacking points, making sure they’re secure and the vehicle is resting on them.
  • Test Stability: Gently shake the truck to ensure it’s stable on the jack stands. If it wobbles or doesn’t feel secure, lower it back onto the floor jack and reposition the jack stands.
  • Perform Repairs or Maintenance: Now that the truck is securely elevated, you can perform the necessary maintenance or repairs.
  • Lower the Truck: When you’re finished working, carefully remove the jack stands and slowly lower the truck using the floor jack.

Conclusion Using a heavy-duty floor jack to lift a truck is a skill that can come in handy for various maintenance and repair tasks. Safety is paramount, so always follow the steps described above and take precautions such as using wheel chocks and jack stands. And always remember to buy heavy-duty floor jacks from reputed manufacturers like Stan Design to ensure safety, efficiency, and durability.

get in touch!

Categories
Bridge Jacks Fast Lube Hydraulic Jacks Jacks Truck Jacks

What is the difference between a truck jack and a car jack?

The car jack is the one essential tool no vehicle or workshop owner can live without. You need it to lift your vehicle high enough for maintenance and repairs. But choosing the right type of car or truck jack is essential for safety and efficiency. Several factors like vehicle type and weight come into play when deciding on the perfect jack type for a task.

While there are several different types of vehicle jacks available on the market, the two broad categories of jacks used all over are car jacks and truck jacks. While they serve the same fundamental purpose of lifting vehicles, they are significantly different because they cater to the unique requirements of trucks and cars. In this blog, we’ll look at the fundamental differences between truck jacks and car jacks to understand their features, applications, and why choosing the right one matters. Read on!

1. Load Capacity and Construction

The first thing that separates a truck jack from a car jack is its load capacity and construction. Trucks are considerably heavier than cars due to their larger size and hauling capabilities. As a result, truck jacks are designed with a higher load capacity to handle the additional weight. These jacks have more robust frames, thicker columns, and sturdier materials to ensure safety when lifting heavy trucks.

Car jacks, on the other hand, are built to handle the weight of standard passenger vehicles. They are lighter and more compact than truck jacks, with a much smaller footprint. You can easily carry one in your car’s trunk and use it for minor repairs like tire changing.

2. Lift Height

The lift height of a vehicle jack refers to how high it can raise a vehicle. Trucks generally have higher ground clearance than cars, requiring jacks with a greater lift height. Truck jacks are designed specifically for this requirement, allowing them to lift a truck high enough for maintenance or repairs.

Your average car, on the other hand, won’t have as much ground clearance as a standard truck due to it needing a lower center of gravity for stability. Hence, car jacks typically have a lower lift height. This design also prevents cars from lifting too high and tipping over.

3. Stability and Base

The stability of a jack is of paramount importance to the safety of both the user and the vehicle. Due to the sheer bulk of trucks, truck jacks are equipped with wider bases and larger footprints. This feature prevents trucks from tipping or wobbling during the lifting process and keeps users safe.

Car jacks are designed for lighter vehicles. Hence, they have a smaller base to match the dimensions of a car’s undercarriage. This design choice optimizes stability for the specific weight and size of cars.

4. Portability and Storage

Portability and storage considerations are different for truck jacks. Car jacks are more compact and lightweight, making them easier to carry and store in a car’s trunk. Their smaller size is practical for occasional use and emergencies.

Truck jacks, due to their larger size and heavier construction, are less portable and more suited to use in a workshop or garage setup.

5. Stand Design’s Innovative Vehicle Jacks

With more than two decades of experience designing vehicle lifting solutions, Stan Design has come up with a set of revolutionary new jacks that make short work of heavy lifting. Cars, trucks, EVs, armored vehicles – no matter what you have, Stan Design’s Scorpion Floor Jacks will lift it in seconds at the push of a button. Safety features like a three-stage locking mechanism and an ergonomic design make the Scorpion Floor Jack safe and easy to use.

The Scorpion Pit Jack, Bridge Jack, and Fast Lube Rolling Pit Jack are all designed to fit any workshop setup. With these innovative vehicle lifting solutions in your workshop, you can service more customers in a day and keep the cash register ringing! Manufactured from premium-grade materials, Stan Design’s jacks are built to last for decades under heavy use.

Selecting the appropriate jack for a vehicle is essential for efficient servicing and user safety during the lifting process. Always make an informed choice based on the type of vehicle you plan to service and the specific tasks you’ll be performing. And remember to choose brands known for manufacturing quality products that last ages.

get in touch!